Instruction Manual

DS33R11 Ethernet Mapper with Integrated T1/E1/J1 Transceiver
188 of 344
Register Name:
SU.MACMIIA
Register Description:
MAC MII Management (MDIO) Address Register
Register Address:
0014h (indirect)
0014h:
Bit # 31 30 29 28 27 26 25 24
Name Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
Default 0 0 0 0 0 0 0 0
0015h:
Bit # 23 22 21 20 19 18 17 16
Name Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved
Default 0 0 0 0 0 0 0 0
0016h:
Bit # 15 14 13 12 11 10 09 08
Name PHYA4 PHYA3 PHYA2 PHYA1 PHYA0 MIIA4 MIIA3 MIIA2
Default 0 1 0 1 1 0 1 0
0017h:
Bit # 07 06 05 04 03 02 01 00
Name MIIA1 MIIA0 Reserved Reserved Reserved Reserved MIIW MIIB
Default 1 1 0 0 0 0 0 0
Bits 11 - 15: PHY Address (PHYA[0:4]) These 5 bits select one of the 32 available PHY address locations to
access through the PHY management (MDIO) bus.
Bits 6 - 10: MII Address (MIIA[0:4]) - These 5 bits are the address location within the PHY that is being accessed.
Bit 1: MII Write (MIIW) Write this bit to 1 in order to execute a write instruction over the MDIO interface. Write the
bit to zero to execute a read instruction.
Bit 0: MII Busy (MIIB) This bit is set to 1 by the DS33R11 during execution of a MII management instruction
through the MDIO interface, and is set to zero when the DS33R11 has completed the instruction. The user should
read this bit and ensure that it is equal to zero prior to beginning a MDIO instruction.