Datasheet

MAX1020/MAX1022/MAX1057/MAX1058
10-Bit, Multichannel ADCs/DACs with FIFO,
Temperature Sensing, and GPIO Ports
______________________________________________________________________________________ 27
Table 6. Unipolar-Mode Register (Addressed Through the Setup Register)
BIT NAME BIT FUNCTION
UCH0/1 7 (MSB) Configure AIN0 and AIN1 for unipolar differential conversion.
UCH2/3 6 Configure AIN2 and AIN3 for unipolar differential conversion.
UCH4/5 5 Configure AIN4 and AIN5 for unipolar differential conversion.
UCH6/7 4 Configure AIN6 and AIN7 for unipolar differential conversion.
UCH8/9 3 Configure AIN8 and AIN9 for unipolar differential conversion.
UCH10/11 2 Configure AIN10 and AIN11 for unipolar differential conversion.
UCH12/13 1 Configure AIN12 and AIN13 for unipolar differential conversion.
UCH14/15 0 (LSB) Configure AIN14 and AIN15 for unipolar differential conversion.
Table 7. Bipolar-Mode Register (Addressed Through the Setup Register)
BIT NAME BIT FUNCTION
BCH0/1 7 (MSB)
Set to one to configure AIN0 and AIN1 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN0 and AIN1 for unipolar
single-ended conversion.
BCH2/3 6
Set to one to configure AIN2 and AIN3 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN2 and AIN3 for unipolar
single-ended conversion.
BCH4/5 5
Set to one to configure AIN4 and AIN5 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN4 and AIN5 for unipolar
single-ended conversion.
BCH6/7 4
Set to one to configure AIN6 and AIN7 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN6 and AIN7 for unipolar
single-ended conversion.
BCH8/9 3
Set to one to configure AIN8 and AIN9 for bipolar differential conversion. Set the corresponding bits
in the unipolar-mode and bipolar-mode registers to zero to configure AIN8 and AIN9 for unipolar
single-ended conversion.
BCH10/11 2
Set to one to configure AIN10 and AIN11 for bipolar differential conversion. Set the corresponding
bits in the unipolar-mode and bipolar-mode registers to zero to configure AIN10 and AIN11 for
unipolar single-ended conversion.
BCH12/13 1
Set to one to configure AIN12 and AIN13 for bipolar differential conversion. Set the corresponding
bits in the unipolar-mode and bipolar-mode registers to zero to configure AIN12 and AIN13 for
unipolar single-ended conversion.
BCH14/15 0 (LSB)
Set to one to configure AIN14 and AIN15 for bipolar differential conversion. Set the corresponding
bits in the unipolar-mode and bipolar-mode registers to zero to configure AIN14 and AIN15 for
unipolar single-ended conversion.