Datasheet

Evaluate: MAX11008
MAX11008 Evaluation Kit/
Evaluation System
_______________________________________________________________________________________ 5
Table 1. Jumper Settings
JUMPER SHUNT POSITION DESCRIPTION
Closed* DVDD is powered from connector J1
JU8
Open DVDD must be provided by user
Closed* AVDD is powered by on-board regulator U3
JU12
Open AVDD must be provided by user
Closed* REFDAC = 2.500V from U2
JU5
Open REFDAC = internal 2.5V from U1
Closed* REFADC = 2.500V from U2
JU6
Open REFADC = internal 2.5V from U1
Closed* Demo circuit RCS1+ connection
JU7
Open Use external user-provided current-sense connection
Closed* Demo circuit RCS1- connection
JU9
Open Use external user-provided current-sense connection
Closed* Demo circuit ADCIN1 sense M1 V
DRAIN
/4
JU10
Open Use external user-provided ADCIN1 connection
Closed* Demo circuit M1 gate connection
JU11
Open Connect to external user-provided FET gate
Closed* Demo circuit D1 temperature sensor connection
JU13
Open Connect external user current-sense diode
Closed* Demo circuit RCS2+ connection
JU15
Open Use external user-provided current-sense connection
Closed* Demo circuit RCS2- connection
JU14
Open Use external user-provided current-sense connection
Closed* Demo circuit ADCIN2 sense M2 V
DRAIN
/4
JU16
Open Use external user-provided ADCIN2 connection
Closed* Demo circuit M2 gate connection
JU17
Open Connect to external user-provided FET gate
Closed* Demo circuit D2 temperature sensor connection
JU18
Open Connect external user current-sense diode
Closed* Force OPSAFE1 pin to DGND, normal operation
JU19
Open OPSAFE1 must be driven by a user-provided source
Closed* Force OPSAFE2 pin to DGND, normal operation
JU20
Open OPSAFE2 must be driven by a user-provided source
* Default position.