Datasheet
Table Of Contents
- OLE_LINK2
- OLE_LINK5
- General Description
- Benefits and Features
- Applications
- Absolute Maximum Ratings
- Package Thermal Characteristics (Note 1)
- Electrical Characteristics (MAX11335/max11336/MAX11337)
- Electrical Characteristics (MAX11338/MAX11339/MAX11340)
- Typical Operating Characteristics
- Pin Configurations
- Pin Description
- Functional Diagrams
- Detailed Description
- Register Descriptions
- Applications Information
- Definitions
- Chip Information
- Ordering Information
- Package Information
- Revision History
29Maxim Integrated
MAX11335–MAX11340
500ksps, 12-/10-Bit, 4-/8-/16-Channel ADCs with
Post-Mux External Signal Conditioning Access
Table 10. Unipolar Register
Table 11. Bipolar Register
BIT NAME BIT
DEFAULT
STATE
FUNCTION
UNI_SETUP 15:11 — Set to 10001 to select the Unipolar register.
UCH0/1 10 0
Set to 1 to configure AIN0 and AIN1 for pseudo-differential conversion.
Set to 0 to configure AIN0 and AIN1 for single-ended conversion.
UCH2/3 9 0
Set to 1 to configure AIN2 and AIN3 for pseudo-differential conversion.
Set to 0 to configure AIN2 and AIN3 for single-ended conversion.
UCH4/5 8 0
Set to 1 to configure AIN4 and AIN5 for pseudo-differential conversion.
Set to 0 to configure AIN4 and AIN5 for single-ended conversion.
UCH6/7 7 0
Set to 1 to configure AIN6 and AIN7 for pseudo-differential conversion.
Set to 0 to configure AIN6 and AIN7 for single-ended conversion.
UCH8/9 6 0
Set to 1 to configure AIN8 and AIN9 for pseudo-differential conversion.
Set to 0 to configure AIN8 and AIN9 for single-ended conversion.
UCH10/11 5 0
Set to 1 to configure AIN10 and AIN11 for pseudo-differential conversion.
Set to 0 to configure AIN10 and AIN11 for single-ended conversion.
UCH12/13 4 0
Set to 1 to configure AIN12 and AIN13 for pseudo-differential conversion.
Set to 0 to configure AIN12 and AIN13 for single-ended conversion.
UCH14/15 3 0
Set to 1 to configure AIN14 and AIN15 for pseudo-differential conversion.
Set to 0 to configure AIN14 and AIN15 for single-ended conversion.
PDIFF_COM 2 0
Set to 1 to configure AIN0–AIN14 to be referenced to one common DC voltage on
the REF-/AIN15. Set to 0 to disable the 15:1 pseudo differential mode.
— 1:0 000 Unused.
BIT NAME BIT
DEFAULT
STATE
FUNCTION
BIP_SETUP 15:11 — Set to 10010 to select the Bipolar register.
BCH0/1 10 0
Set to 1 to configure AIN0 and AIN1 for bipolar fully differential conversion.
Set to 0 to configure AIN0 and AIN1 for unipolar conversion mod
e.
BCH2/3 9 0
Set to 1 to configure AIN2 and AIN3 for bipolar fully differential conversion.
Set to 0 to configure AIN2 and AIN3 for unipolar conversion mode.
BCH4/5 8 0
Set to 1 to configure AIN4 and AIN5 for bipolar fully differential conversion.
Set to 0 to configure AIN4 and AIN5 for unipolar conversion mode.
BCH6/7 7 0
Set to 1 to configure AIN6 and AIN7 for bipolar fully differential conversion.
Set to 0 to configure AIN6 and AIN7 for unipolar conversion mode.
BCH8/9 6 0
Set to 1 to configure AIN8 and AIN9 for bipolar fully differential conversion.
Set to 0 to configure AIN8 and AIN9 for unipolar conversion mode.
BCH10/11 5 0
Set to 1 to configure AIN10 and AIN11 for bipolar fully differential conversion.
Set to 0 to configure AIN10 and AIN11 for unipolar conversion mode.
BCH12/13 4 0
Set to 1 to configure AIN12 and AIN13 for bipolar fully differential conversion.
Set to 0 to configure AIN12 and AIN13 for unipolar conversion mode.
BCH14/15 3 0
Set to 1 to configure AIN14 and AIN15 for bipolar fully differential conversion.
Set to 0 to configure AIN14 and AIN15 for unipolar conversion mode.
— 2:0 000 Unused.