Datasheet

2 Maxim Integrated
Evaluates: MAX16833/MAX16833B
MAX16833 Evaluation Kit
Note: Indicate that you are using the MAX16833 when contacting these component suppliers.
Component Suppliers
Component List (continued)
*EP = Exposed pad.
SUPPLIER PHONE WEBSITE
Diodes Incorporated 805-446-4800 www.diodes.com
International Rectifier 310-322-3331 www.irf.com
IRC, Inc. 361-992-7900 www.irctt.com
Murata Electronics North America, Inc. 770-436-1300 www.murata-northamerica.com
SUN Electronic Industries Corporation 619-661-8288 www.sunelec.co.jp
Sumida Corp. 847-545-6700 www.sumida.com
Vishay 402-563-6866 www.vishay.com
DESIGNATION QTY DESCRIPTION
L1 1
9.5FH, 8.5A inductor
(14.9mm x 14.9mm)
Sumida CDEP147NP-9R5MC-95
M1 1
100V, 42A n-channel MOSFET
(DPAK)
International Rectifier
IRLR3110ZPbF
M2 1
100V, 12A p-channel MOSFET
(D
2
PAK)
Vishay SiHF9530S
M3 0 Not installed, MOSFET (DPAK)
R1, R16 0
Not installed, resistors (0603)
R1 is shorted by PC trace;
R16 is open
R2, R14 2
0.05I Q1% sense resistors
(2512)
IRC LRC-LR2512LF-01-R050-F
R3 1 536kI Q1% resistor (0603)
R4 1
0.2I Q1% sense resistor (2010)
IRC LRC-LR2010LF-01-R200-F
R5, R8 2 10kI Q1% resistors (0603)
DESIGNATION QTY DESCRIPTION
R6 1 22I Q1% resistor (0603)
R7 1 44.2kI Q1% resistor (0603)
R9 1 150kI Q1% resistor (0603)
R10 1 20kI Q1% resistor (0603)
R11 1 49.9kI Q1% resistor (0603)
R12 1 2.2I Q5% resistor (0603)
R13 1 4.02kI Q1% resistor (0603)
R15 1 10I Q5% resistor (0603)
R17 1 100I Q1% resistor (0603)
R18 1
50kI potentiometer
(9.53mm x 4.83mm x 10.03mm)
R19 1 24.9kI Q1% resistor (0603)
R20 1 220I Q1% resistor (0603)
U1 1
LED driver (16 TSSOP-EP*)
Maxim MAX16833AUE+
— 1
LED driver (16 TSSOP-EP*)
Maxim MAX16833BAUE+
— 3 Shunts
— 1
PCB: MAX16833 EVALUATION
KIT+