Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsDev KitsPCB design board

DESIGNATION QTY DESCRIPTION

C1, C3 2

4.7FF Q10%, 10V X5R ceramic

capacitors (0603)

TDK C1608X5R1A475K

C2, C4 2

10FF Q10%, 10V X7R ceramic

capacitors (0805)

Murata GRM21BR71A106K

C5, C6 0

Not installed, ceramic capacitors

(0805)

JU1 1 3-pin header

L1, L2 2

4.7FH, 0.9A low-profile inductors

Sumida CDH36D07HF-4R7MC

DESIGNATION QTY DESCRIPTION

R1 0

Not installed, resistor—short PC

trace (0603)

U1 1

Dual-output DC/DC power supply

for AMOLED displays

(12 UTDFN-EP)

Maxim MAX17116EVC+

— 1 Shunt

— 1

PCB: MAX17116 EVALUATION

KIT

SUPPLIER PHONE WEBSITE

Murata Electronics North America, Inc. 770-436-1300 www.murata-northamerica.com

Sumida Corp. 847-545-6700 www.sumida.com

TDK Corp. 847-803-6100 www.component.tdk.com

MAX17116 Evaluation Kit

Evaluates: MAX17116 in a 12-Pin UTDFN Package

_________________________________________________________________ Maxim Integrated Products 1

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.

Component List

Component Suppliers

19-5845; Rev 0; 5/11

Ordering Information appears at end of data sheet.

General Description

The MAX17116 evaluation kit (EV kit) is a fully assem-

bled and tested surface-mount PCB that evaluates the

MAX17116 dual-output DC/DC power supply for active-

matrix organic light-emitting diode (AMOLED) displays,

available in a 12-pin UTDFN package with an exposed

pad. The EV kit includes dual switch-mode power-supply

(SMPS) outputs, a fixed 4.6V PWM step-up regulator, and

an adjustable (-5.4V to -1.5V) PWM inverting regulator.

The EV kit operates from a +2.3V to +4.2V single power

supply.

Features

S +2.3V to +4.2V Input Range

S High-Performance PWM Step-Up Regulator

S High-Performance PWM Inverting Regulator

S 1.4MHz Switching Frequency

S Shutdown Control

S Proven PCB Layout

S Fully Assembled and Tested

Note: Indicate that you are using the MAX17116 when contacting these component suppliers.

Summary of content (6 pages)

PAGE 1
9-5845; Rev 0; 5/11 MAX17116 Evaluation Kit Evaluates: MAX17116 in a 12-Pin UTDFN Package General Description The MAX17116 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17116 dual-output DC/DC power supply for activematrix organic light-emitting diode (AMOLED) displays, available in a 12-pin UTDFN package with an exposed pad. The EV kit includes dual switch-mode power-supply (SMPS) outputs, a fixed 4.6V PWM step-up regulator, and an adjustable (-5.
PAGE 2
MAX17116 Evaluation Kit Evaluates: MAX17116 in a 12-Pin UTDFN Package Quick Start • MAX17116 EV kit Recommended Equipment • +2.3V to +4.2V, 1A power supply (VIN) by an inverting regulator with a synchronous rectifier. The step-up regulator output is a fixed voltage of +4.6V and the inverting regulator output is adjustable from -5.4V to -1.5V through the single-wire EN serial interface. The EV kit operates from a +2.3V to +4.2V single power supply.
PAGE 3
MAX17116 Evaluation Kit Evaluates: MAX17116 in a 12-Pin UTDFN Package Figure 1.
PAGE 4
MAX17116 Evaluation Kit Evaluates: MAX17116 in a 12-Pin UTDFN Package 1.0” Figure 2. MAX17116 EV Kit Component Placement Guide— Component Side 1.0’’ Figure 3. MAX17116 EV Kit PCB Layout—Component Side 1.0’’ Figure 4.
PAGE 5
MAX17116 Evaluation Kit Evaluates: MAX17116 in a 12-Pin UTDFN Package Ordering Information PART TYPE MAX17116EVKIT# EV Kit #Denotes RoHS compliant.
PAGE 6
MAX17116 Evaluation Kit Evaluates: MAX17116 in a 12-Pin UTDFN Package Revision History REVISION NUMBER REVISION DATE 0 5/11 DESCRIPTION Initial release PAGES CHANGED — Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.