Datasheet

MAX3205E/MAX3207E/MAX3208E
Dual, Quad, and Hex High-Speed
Differential ESD-Protection ICs
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
CC
= +5V, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at V
CC
= +5V and T
A
= +25°C.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 1: Parameters are 100% production tested at +25°C. Limits over temperature are guaranteed by design only.
Note 2: Idealized clamp voltages. See the
Applications Information section for more information.
Note 3: Guaranteed by design, not production tested.
V
CC
to GND...........................................................-0.3V to +6.0V
I/O_ to GND................................................-0.3V to (V
CC
+ 0.3V)
Continuous Power Dissipation (T
A
= +70°C)
6-Pin SOT23 (derate 8.7mW/°C above +70°C)............696mW
9-Bump WLP (derate 14.1mW/°C above +70°C).............0mW
10-Pin µMAX (derate 5.6mW/°C above +70°C) ...........444mW
16-Pin TQFN (derate 20.8mW/°C above +70°C) .......1667mW
Operating Temperature Range .........................-40°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature .....................................................+150°C
Lead Temperature (excluding WLP; soldering, 10s) .......+300°C
Soldering Temperature (reflow) .......................................+260°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage V
CC
0.9 5.5 V
Supply Current I
CC
1 100 nA
Diode Forward Voltage V
F
I
F
= 10mA 0.65 0.95 V
Positive transients V
CC
+ 25
T
A
= +25°C, ±15kV Human
Body Model, I
F
= 10A
Negative transients -25
Positive transients V
CC
+ 60
T
A
= +25°C, ±8kV Contact
Discharge (IEC 61000-4-2),
I
F
= 24A
Negative transients -60
Positive transients V
CC
+ 100
Channel Clamp Voltage
(Note 2)
V
C
T
A
= +25°C, ±15kV Air-Gap
Discharge (IEC 61000-4-2),
I
F
= 45A
Negative transients -100
V
Channel Leakage Current -0.1 +0.1 μA
MAX3205EAWL+T
MAX3207EAUT+T
2.5 3
MAX3205EATE+
MAX3208EATE+
2.7 3.2
Channel I/O Capacitance V
CC
= +3.3V, bias of V
CC
/ 2
MAX3208EAUB+ 2.6 3.1
pF
Channel I/O to I/O
Variation in Capacitance
C
IN
V
CC
= +3.3V, bias of V
CC
/ 2, C
I/O_
to GND ±0.05 pF
TRANSIENT SUPPRESSOR
V
CC
Capacitance to GND 10 pF
ESD Trigger Voltage dV/dt  1V/ns (Note 3) 9 V