Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsLinear ICsLinear IC - Op-amp Multi-purpose SOIC 8 N

General Description

The MAX4165–MAX4169 family of operational amplifiers

combines excellent DC accuracy with high output current

drive, single-supply operation, and rail-to-rail inputs and

outputs. These devices operate from a single +2.7V to

+6.5V supply, or from dual ±1.35V to ±3.25V supplies.

They typically draw 1.2mA supply current, and are guar-

anteed to deliver 80mA output current.

The MAX4166/MAX4168 have a shutdown mode that

reduces supply current to 38µA per amplifier and

places the outputs into a high-impedance state. The

MAX4165–MAX4169’s precision performance com-

bined with high output current, wide input/output

dynamic range, single-supply operation, and low power

consumption makes them ideal for portable audio

applications and other low-voltage, battery-powered

systems. The MAX4165 is available in the space-saving

5-pin SOT23 package and the MAX4166 is available in

a tiny 2mm x 2mm x 0.8mm µDFN package.

Applications

Portable/Battery-Powered Audio Applications

Portable Headphone Speaker Drivers

Laptop/Notebook Computers

Sound Ports/Cards

Set-Top Boxes

Cell Phones

Hands-Free Car Phones (kits)

Signal Conditioning

Digital-to-Analog Converter Buffers

Transformer/Line Drivers

Motor Drivers

Features

♦ 80mA (min) Output Drive Capability

♦ Rail-to-Rail Input Common-Mode Voltage Range

♦ Rail-to-Rail Output Voltage Swing

♦ 1.2mA Supply Current per Amplifier

♦ +2.7V to +6.5V Single-Supply Operation

♦ 5MHz Gain-Bandwidth Product

♦ 250µV Offset Voltage

♦ 120dB Voltage Gain (R

= 100k

ΩΩ

)

♦ 88dB Power-Supply Rejection Ratio

♦ No Phase Reversal for Overdriven Inputs

♦ Unity-Gain Stable for Capacitive Loads to 250pF

♦ Low-Power Shutdown Mode:

Reduces Supply Current to 38µA Places

Outputs in High-Impedance State

♦ Available in 5-Pin SOT23 Package (MAX4165) or

2mm x 2mm x 0.8mm µDFN (MAX4166)

MAX4165–MAX4169

High-Output-Drive, Precision, Low-Power, Single-

Supply, Rail-to-Rail I/O Op Amps with Shutdown

________________________________________________________________

Maxim Integrated Products

IN-

IN+

OUT

MAX4165

SOT23-5

TOP VIEW

Pin Configurations continued at end of data sheet.

Pin Configurations

Ordering Information

19-1224; Rev 3; 1/07

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Ordering Information continued on last page.

Selector Guide

PART

AMPS PER

PACKAGE

SHUTDOWN

MODE

MAX4165 Single —

MAX4166 Single Yes

MAX4167 Dual —

MAX4168 Dual Yes

MAX4169 Quad —

Typical Operating Circuit appears at end of data sheet.

PART TEMP RANGE

PIN-

PACKAGE

TOP

MARK

MAX4165EUK-T -40°C to +85°C 5 SOT23-5 AABY

MAX4166EPA -40°C to +85°C 8 Plastic DIP —

MAX4166ESA -40°C to +85°C 8 SO —

MAX4166EUA -40°C to +85°C 8 µMAX —

MAX4166ELA+T -40°C to +85°C 8 µDFN-8 AAG

Denotes lead-free package.

Summary of content (17 pages)

PAGE 1
9-1224; Rev 3; 1/0 7 High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown The MAX4165–MAX4169 family of operational amplifiers combines excellent DC accuracy with high output current drive, single-supply operation, and rail-to-rail inputs and outputs. These devices operate from a single +2.7V to +6.5V supply, or from dual ±1.35V to ±3.25V supplies. They typically draw 1.2mA supply current, and are guaranteed to deliver 80mA output current.
PAGE 2
MAX4165–MAX4169 High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown ABSOLUTE MAXIMUM RATINGS Supply Voltage (VCC to VEE) ....................................................7V IN_+, IN_-, SHDN_............................(VEE - 0.3V) + (VCC + 0.3V) OUT_ (shutdown mode) ...................(VEE - 0.3V) + (VCC + 0.3V) Output Short-Circuit Duration to VCC or VEE (Note 1) .....Continuous Continuous Power Dissipation (TA = +70°C) 5-Pin SOT23 (derate 7.
PAGE 3
High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown MAX4165–MAX4169 DC ELECTRICAL CHARACTERISTICS (continued) (VCC = +2.7V to +6.5V, VEE = 0V, VCM = 0V, VOUT = (VCC / 2), RL = 100kΩ to (VCC / 2), V S HDN ≥ 2V, TA = +25°C, unless otherwise noted.
PAGE 4
MAX4165–MAX4169 High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown DC ELECTRICAL CHARACTERISTICS (continued) (VCC = +2.7V to +6.5V, VEE = 0V, VCM = 0V, VOUT = (VCC / 2), RL = 100kΩ to (VCC / 2), V S HDN ≥ 2V, TA = -40°C to +85°C, unless otherwise noted.
PAGE 5
High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown -10 108 -20 30 72 20 36 30 72 20 36 10 0 10 0 -36 -40 -50 -60 0 -36 0 -10 -72 -10 -72 -70 -20 -108 -20 -108 -80 -30 -144 10M -30 -144 10M -90 1k 10k 100k 1M 100 1k 10k 100k 1M 100 10k 100k 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) OUTPUT IMPEDANCE vs. FREQUENCY SUPPLY CURRENT PER AMPLIFIER vs. TEMPERATURE SHUTDOWN SUPPLY CURRENT PER AMPLIFIER vs. TEMPERATURE 1.
PAGE 6
____________________________Typical Operating Characteristics (continued) (VCC = +5.0V, VEE = 0V, RL = 100kΩ, TA = +25°C, unless otherwise noted.) 87.5 87.0 CMRR (dB) 1.85 RL = 100kΩ 120 LARGE-SIGNAL GAIN (dB) 1.95 1.90 140 MAX4165-10 88.0 MAX4165-09 2.00 86.5 86.0 85.5 85.0 1.80 -20 0 20 40 60 80 100 -40 VCC = +6.5V RL to VCC -20 0 20 40 60 80 0 100 0.1 0.3 0.2 0.4 0.6 0.5 LARGE-SIGNAL GAIN vs. OUTPUT VOLTAGE (SOURCING, VCC = 6.5V) LARGE-SIGNAL GAIN vs.
PAGE 7
High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown TOTAL HARMONIC DISTORTION AND NOISE vs. FREQUENCY VOUT = 2Vp-p 500kHz LOWPASS FILTER RL = 10kΩ TO VCC / 2 200 VCC = +2.7V, RL = 100Ω 150 100 RL = 25Ω THD + NOISE (%) 0.04 1 MAX4165-18 VCC = +6.5V, RL = 100Ω THD + NOISE (%) OUTPUT VOLTAGE HIGH (mV) RL to VEE 250 0.05 MAX4165-17 300 TOTAL HARMONIC DISTORTION AND NOISE vs. PEAK-TO-PEAK OUTPUT VOLTAGE 0.03 0.02 RL = 250Ω 0.1 RL = 2kΩ 0.01 0.
PAGE 8
MAX4165-MAX4169 High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown Pin Description PIN MAX4166 MAX4165 DIP/SO (MAX (DFN 1 6 4 — 1, 5 — 2 8 MAX4168 MAX4167 MAX4169 NAME FUNCTION DIP/SO (MAX — — — — OUT Output 2, 6 — 5, 7, 8, 10 — — N.C. No Connection. Not internally connected. — — 1, 7 1, 13 1, 9 1, 7 OUT1, OUT2 4 3 4 4 4 11 VEE Negative Supply. Ground for singlesupply operation.
PAGE 9
High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown MAX4165–MAX4169 Applications Information 6.5V Package Power Dissipation Warning: Due to the high output current drive, this op amp can exceed the absolute maximum power-dissipation rating. As a general rule, as long as the peak current is less than or equal to 80mA, the maximum package power dissipation will not be exceeded for any of the package types offered. There are some exceptions to this rule, however.
PAGE 10
MAX4165–MAX4169 High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown INPUT 0.25Vp-p 0.1µF VCC = +3V VCC = +3V 100k MAX4165 MAX4166 MAX4167 MAX4168 MAX4169 1/2 MAX4167 1/2 MAX4168 4.7k R3 100k 4.7k 900k 1µF R3 = R1 R2 100k 47Ω 32Ω R1 100k 100k 100k VCC = +3V R2 0.1µF Figure 4. Reducing Offset Error Due to Bias Current (Noninverting) 1/2 MAX4167 1/2 MAX4168 Figure 3.
PAGE 11
High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown MAX4165–MAX4169 1kΩ 1kΩ Since the input stage switches between the NPN and PNP pairs, the input bias current changes polarity as the input voltage passes through the transition region. Match the effective impedance seen by each input to reduce the offset error caused by input bias currents flowing through external source impedances (Figures 4 and 5).
PAGE 12
CAPACITIVE LOAD (pF) VCC = +5.0V RL to VCC / 2 OUT (20mV/div) STABLE REGION 100 VCC = +3.0V, CL = 1500pF RL = 100kΩ, RISO = 0Ω IN (20mV/div) UNSTABLE REGION 10 MAX4165-fig09 MAX4165-fig08 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 0 1k 10k 100k TIME (1µs/div) RESISTIVE LOAD (kΩ) Figure 8. Capacitive -Load Stability VCC = +3.0V, CL = 1500pF RL = 100kΩ, RISO = 39Ω Figure 9.
PAGE 13
SHDN (1V/div) MAX4165-fig13 MAX4165–MAX4169 MAX4165-fig12 High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown SHDN (1V/div) ICC (1mA/div) OUT (1V/div) TIME (5µs/div) TIME (50µs/div) Figure 13. Shutdown Enable/Disable Supply Current VCC (1V/div) MAX4165-fig15 MAX4165-fig14 Figure 12. Shutdown Output Voltage Enable/Disable VCC (1V/div) IEE (1mA/div) OUT (2V/div) TIME (5µs/div) Figure 14. Power-Up/Down Output Voltage TIME (5µs/div) Figure 15.
PAGE 14
High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown MAX4165–MAX4169 Pin Configurations (continued) TOP VIEW N.C. 1 IN- 2 8 SHDN 7 MAX4166 OUT1 1 8 VCC 7 OUT2 IN1+ 3 6 IN2- VEE 4 5 IN2+ IN+ 1 8 SHDN VCC N.C. 2 7 IN- IN1- 2 6 N.C. 5 VCC IN+ 3 6 OUT VEE 3 VEE 4 5 N.C. OUT 4 DIP/SO/μMAX MAX4166 MAX4167 DIP/SO μDFN (2mm x 2mm x 0.
PAGE 15
High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown Ordering Information (continued) PART TEMP RANGE PINPACKAGE TOP MARK MAX4167EPA -40°C to +85°C 8 Plastic DIP — MAX4167ESA MAX4168EPD MAX4168ESD MAX4168EUB MAX4169EPD MAX4169ESD -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C 8 SO 14 Plastic DIP 14 SO 10 μMAX 14 Plastic DIP 14 SO — — — — — — VCC R3 C1 VIN C2 MAX4165 MAX4166 R4 ___________________Chip Informat
PAGE 16
Package Information (continued) SOT-23 5L .EPS (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) PACKAGE OUTLINE, SOT-23, 5L 21-0057 e E 1 1 10LUMAX.EPS MAX4165-MAX4169 High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown 4X S 10 10 INCHES H Ø0.50±0.1 0.6±0.1 1 1 0.6±0.1 BOTTOM VIEW TOP VIEW D2 MILLIMETERS MAX DIM MIN 0.
PAGE 17
High-Output-Drive, Precision, Low-Power, SingleSupply, Rail-to-Rail I/O Op Amps with Shutdown XXXX XXXX XXXX b e 6, 8, 10L UDFN.EPS A D N SOLDER MASK COVERAGE E PIN 1 0.10x45∞ L L1 1 SAMPLE MARKING PIN 1 INDEX AREA A A (N/2 -1) x e) 7 CL CL b L L A A2 e EVEN TERMINAL A1 e ODD TERMINAL PACKAGE OUTLINE, 6, 8, 10L uDFN, 2x2x0.80 mm 21-0164 -DRAWING NOT TO SCALE- A 1 2 COMMON DIMENSIONS SYMBOL MIN. NOM. A 0.70 0.75 0.80 A1 0.15 0.20 0.25 A2 0.020 0.025 D 1.95 2.