Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsInterface ICsInterface IC - analogue switches SOT 23 5

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

General Description

The MAX4503/MAX4504 are low-voltage, dual-supply,

single-pole/single-throw (SPST), CMOS analog switch-

es. The MAX4503 is normally open (NO). The MAX4504

is normally closed (NC).

These CMOS switches can operate continuously with

dual supplies between ±1.V and ±6V. Each switch can

handle rail-to-rail analog signals. The off-leakage cur-

rent is only 1nA at +25°C or 10nA at +85°C.

The digital input is CMOS-logic compatible when using

±5V supplies. A unique logic input architecture allows

this even though the parts have no ground pin.

For single-supply operation, use the MAX4501/

MAX4502, which are pin-for-pin equivalents.

________________________Applications

Battery-Operated Equipment

Audio and Video Signal Routing

Low-Voltage Data-Acquisition Systems

Communications Circuits

Cellular Phones

PCMCIA Cards

Modems

____________________________Features

♦ Available in SOT23-5 Package

♦ Dual-Supply Operation from ±1V to ±6V

♦ Guaranteed On-Resistance:

250

ΩΩ

with ±5V Supplies

♦ Guaranteed Low Off-Leakage Currents:

1nA at +25°C

10nA at +85°C

♦ Guaranteed Low On-Leakage Currents:

2nA at +25°C

20nA at +85°C

♦ Guaranteed Low Charge Injection: 10pC Max

♦ Fast Switching Speed: t

= 150ns, t

OFF

= 100ns

♦ CMOS-Logic Compatible Input

MAX4503/MAX4504

Low-Voltage, Dual-Supply, SPST,

CMOS Analog Switches

________________________________________________________________ Maxim Integrated Products 1

TOP VIEW

N.C.

V+

V-

N.C.

COM

MAX4503

DIP/SO

N.C.

V+

V-

N.C.

COM

MAX4504

DIP/SO

N.C. = NOT INTERNALLY CONNECTED

V-

V+

COM

MAX4503

SOT23-5

V-

V+

COM

MAX4504

SOT23-5

INPUT

LOW

HIGH

SWITCH STATE

MAX4503

OFF

MAX4504

OFF

MARKING INFORMATION (SOTs ONLY)

XX XX

AC = MAX4503

AD = MAX4504

LOT SPECIFIC CODE

___________________________________________________________Pin Configurations

19-1064; Rev 1; 1/07

PART

MAX4503CPA

MAX4503CSA

MAX4503CUK 0°C to +70°C

0°C to +70°C

TEMP RANGE PIN-PACKAGE

8 Plastic DIP

8 SO

5 SOT23-5

______________Ordering Information

Ordering Information continued at end of data sheet.

*Contact factory for dice specifications.

**Contact factory for availability.

MAX4503C/D 0°C to +70°C Dice*

MAX4503EPA -40°C to +85°C 8 Plastic DIP

MAX4503ESA -40°C to +85°C 8 SO

MAX4503EUK -40°C to +85°C 5 SOT23-5

MAX4503MJA -55°C to +125°C 8 CERDIP**

Summary of content (13 pages)

PAGE 1
9-1064; Rev 1; 1/07 Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches ____________________________Features The MAX4503/MAX4504 are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The MAX4503 is normally open (NO). The MAX4504 is normally closed (NC). These CMOS switches can operate continuously with dual supplies between ±1.V and ±6V. Each switch can handle rail-to-rail analog signals. The off-leakage current is only 1nA at +25°C or 10nA at +85°C.
PAGE 2
MAX4503/MAX4504 Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches ABSOLUTE MAXIMUM RATINGS (Voltages Referenced to V-) V+ ..............................................................................-0.3V, +13V Voltage into Any Terminal (Note 1) ..........-0.3V to (V+ + 0.3V) or ±10mA (whichever occurs first) Continuous Current into Any Terminal..............................±10mA Peak Current, NO_ or COM_ (pulsed at 1ms,10% duty cycle)...................................
PAGE 3
Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches (V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, VINH = 3.5V, VINL = 1.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.
PAGE 4
MAX4503/MAX4504 Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches ELECTRICAL CHARACTERISTICS—±3V Supply (V+ = +2.7V to +3.3V, V- = -2.7V to -3.3V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.
PAGE 5
Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches V+ = +1V V- = -1V 160 5 MAX4503-02 1000 MAX4503-01 180 V+ = +5V V- = -5V 4 3 140 TA = +125°C 80 V+ = +2V V- = -2V 100 V+ = +4V V- = -4V 40 -2 V+ = +5V V- = -5V TA = +25°C -3 20 -4 TA = -55°C 0 -5 10 0 1 2 3 4 5 -5 -4 -3 -2 -1 VCOM (V) 0 1 2 ICOM ON 1 0.01 0.001 ICOM/NO/NC OFF 0.0001 0.
PAGE 6
MAX4503/MAX4504 Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches ______________________________________________________________Pin Description PIN MAX4503 MAX4504 NAME FUNCTION DIP/SO SOT23-5 DIP/SO SOT23-5 1 1 1 1 COM Analog Switch Common Terminal 2, 3, 5 — 2, 3, 5 — N.C.
PAGE 7
Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches V+ VIN NO 0V VNO MAX4503 VIN VOUT COM IN 50% VIN V+ 90% 90% VOUT VOUT V50Ω 35pF 1k 0V V- tOFF tON V+ VIN NC 0V VNC MAX4504 VIN VOUT COM IN 90% VOUT V50Ω 50% VIN V+ 1k 90% VOUT 35pF 0V V- tON tOFF Figure 1.
PAGE 8
MAX4503/MAX4504 Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches _________________________________Test Circuits/Timing Diagrams (continued) V+ 10nF OFF ISOLATION = 20log NETWORK ANALYZER V+ V+ IN NO or NC MAX4503 MAX4504 COM 50Ω VIN VOUT 50Ω MEAS. V- V ON LOSS = 20log OUT VIN REF 50Ω 50Ω V- VOUT VIN MEASUREMENTS ARE STANDARDIZED AGAINST SHORT AT SOCKET TERMINALS. OFF ISOLATION IS MEASURED BETWEEN COM AND “OFF” TERMINAL ON EACH SWITCH.
PAGE 9
Low-Voltage, Dual-Supply, SPST, CMOS Analog Switches D P0 W P2 B0 t D1 F P NOTE: DIMENSIONS ARE IN MM. AND FOLLOW EIA481-1 STANDARD. K0 A0 3.988 ±0.102 40.005 ±0.203 P2 2.007 ±0.051 t 0.254 ±0.127 W 8.001 +0.305 -0.102 A0 3.200 ±0.102 E 1.753 ±0.102 P0 B0 3.099 ±0.102 F 3.505 ±0.051 P010 D 1.499 +0.102 +0.000 K0 1.397 ±0.102 3.988 ±0.102 0.991 +0.254 +0.
PAGE 10
Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) SOT-23 5L .
PAGE 11
Low Voltage, Dual-Supply, SPST, CMOS Analog Switches N E H INCHES MILLIMETERS MAX MIN 0.069 0.053 0.010 0.004 0.014 0.019 0.007 0.010 0.050 BSC 0.150 0.157 0.228 0.244 0.016 0.050 MAX MIN 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 1.27 BSC 3.80 4.00 5.80 6.20 0.40 SOICN .EPS DIM A A1 B C e E H L 1.27 VARIATIONS: 1 INCHES TOP VIEW DIM D D D MIN 0.189 0.337 0.386 MAX 0.197 0.344 0.394 MILLIMETERS MIN 4.80 8.55 9.80 MAX 5.00 8.75 10.
PAGE 12
Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) PDIPN.
PAGE 13
Package Information (continued) CDIPS.EPS (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) Revision History Changes made at Rev 1: 1, 4, 10, 11, 12 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.