Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsDev KitsPCB design board

19-4336; Rev 0; 10/08

MAX5134 Evaluation Kit

Evaluates: MAX5134–MAX5137

For pricing, delivery, and ordering information, please contact Maxim Direct

at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.

General Description

The MAX5134 evaluation kit (EV kit) provides a proven

design to evaluate the MAX5134 quad, 16-bit, low-

power digital-to-analog converter (DAC). The EV kit

also includes Windows

2000/XP/Vista

-compatible

software that provides a simple graphical user interface

(GUI) for exercising the features of the MAX5134.

The MAX5134 EV kit PCB comes with a MAX5134AGTG+

installed. Contact the factory for free samples of the

pin-compatible MAX5135GTG+ (quad, 12-bit DAC),

MAX5136AGTG+ (dual, 16-bit DAC), and MAX5137GTG+

(dual, 12-bit DAC) to evaluate these devices.

Features

o Windows 2000/XP/Vista (32-Bit)-Compatible

Software

o Supports Standard SPI™ Interface

o USB-PC Connection (Cable Included)

o USB Powered

o 8-Pin DAC Output Signal Header

o Proven PCB Layout

o Lead-Free and RoHS Compliant

o Fully Assembled and Tested

Component List

Ordering Information

DESIGNATION QTY DESCRIPTION

C1, C3–C10,

C17, C21, C23

0.1µF ±10%, 16V X7R ceramic

capacitors (0603)

TDK C1608X7R1C104K

C2, C13, C15,

C22, C24

10µF ±20%, 6.3V X5R ceramic

capacitors (0805)

TDK C2012X5R0J106M

C11, C12 2

10pF ±5%, 50V C0G ceramic

capacitors (0603)

TDK C1608C0G1H100J

C14, C16 2

1µF ±20%, 6.3V X5R ceramic

capacitors (0603)

TDK C1608X5R0J105M

C18, C19 2

22pF ±5%, 50V C0G ceramic

capacitors (0603)

TDK C1608C0G1H220J

C20 1

3300pF ±10%, 50V X7R ceramic

capacitor (0603)

TDK C1608X7R1H332K

C25 0

Not installed, ceramic capacitor

(0603)

DESIGNATION QTY DESCRIPTION

C26 1

39pF ±5%, 50V C0G ceramic

capacitor (0402)

Murata GRM1555C1H390G

D1 1 Green LED (0603)

FB1 1 0Ω ±5% resistor (0603)

H1 0 Not installed, header

H2 1 Dual-row (2 x 4) 8-pin header

H3 1 Dual-row (2 x 6) 12-pin header

JUA–JUE 0 Not installed

JU1–JU5, JU7,

JU8, JU9

8 3-pin headers

JU6 1 5-pin header

P1 1

USB type-B right-angle female

receptacle

R1, R8 2 0Ω ±5% resistors (0603)

R2 1 220Ω ±5% resistor (0603)

R3 1 10kΩ ±5% resistor (0603)

R4 1 2.2kΩ ±5% resistor (0603)

R5 1 1.5kΩ ±5% resistor (0603)

R6, R7 2 27Ω ±5% resistors (0603)

PART TYPE

MAX5134EVKIT+ EV Kit

Windows and Windows Vista are registered trademarks of Microsoft Corp.

SPI is a trademark of Motorola, Inc.

Denotes lead-free and RoHS compliant.

Summary of content (14 pages)

PAGE 1
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 General Description The MAX5134 evaluation kit (EV kit) provides a proven design to evaluate the MAX5134 quad, 16-bit, lowpower digital-to-analog converter (DAC). The EV kit also includes Windows ® 2000/XP/Vista ®-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX5134. The MAX5134 EV kit PCB comes with a MAX5134AGTG+ installed.
PAGE 2
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Component List (continued) DESIGNATION QTY 1 Quad, 16-bit DAC (16 TQFN-EP*) Maxim MAX5134AGTG+ U6 1 2.
PAGE 3
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Quick Start Required Equipment Before beginning, the following equipment is needed. • MAX5134 EV kit (USB cable included) • A user-supplied Windows 2000/XP/Vista-compatible PC with a spare USB port • Two digital voltmeters (DVMs) • USB powered (use optional external power supply for enhanced performance) Note: In the following sections, software-related items are identified by bolding. Text in bold refers to items directly from the EV kit software.
PAGE 4
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 1.
PAGE 5
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 2.
PAGE 6
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 3. Advanced SPI User Interface Window (3-Wire Interface Tab) Detailed Description of Hardware The MAX5134 EV kit provides a proven layout for the MAX5134. An on-board analog output signal header (H2), an on-board digital input/output signal header (H3), and jumpers to disconnect the on-board microcontroller are all included on the EV kit. Reference At power-up, the MAX5134 EV kit defaults to using the internal 2.440V reference.
PAGE 7
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 User-Supplied SPI Interface User-Supplied Power Supplies To use the MAX5134 EV kit with a user-supplied SPI interface, first move the shunts of JU1–JU5 to the 2-3 position and JU6 to the 1-3 position. Next, move the shunt of JU7 to the 2-3 position. Then apply an external 2.7V to 5.25V power supply to DVDD. Lastly, connect CS, SCLK, DIN, and GND signals to the corresponding pins of header H3.
PAGE 8
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 4a.
PAGE 9
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 4b.
PAGE 10
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 5.
PAGE 11
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 6.
PAGE 12
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 7.
PAGE 13
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 8.
PAGE 14
MAX5134 Evaluation Kit Evaluates: MAX5134–MAX5137 Figure 9. MAX5134 EV Kit PCB Layout—Solder Side Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed.