Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsDev KitsPCB design board

Evaluates: MAX5216 MAX5216DACLite Evaluation Kit

Component List

General Description

The MAX5216DACLite evaluation kit (EV kit) enables

evaluation of the MAX5216 single-channel, low-power,

buffered-output, 3-wire SPI interface, 16-bit DAC. The EV

kit also includes Windows XP

-, Windows Vista

-, and

Windows

7-compatible software that provide a simple

graphical user interface (GUI) for exercising the features

of the IC.

The EV kit enables a quick evaluation of the device, with

a fixed supply voltage of 3.3V. The EV kit allows for the

generation of selectable waveforms to display DAC AC

signal-generation capability.

The EV kit can be used as a system hardware debugging

tool, or as a signal generator demonstration kit.

Features

● USBPowered,NoAdditionalSupplyNeeded*

(CableNotIncluded)

● 3.3VFixedVDDfromOn-BoardLDO(MAX8510)

● 3.000VOn-BoardPreciseVoltageReference

(MAX6133)

● DirectUSBCommunicationthroughtheMAXQ622

Microcontroller

● WindowsXP-,WindowsVista-,andWindows7

(32-Bit)-CompatibleSoftware

● SPIInterfaceTerminals

● ProvenPCBLayout

● FullyAssembledandTested

19-6527; Rev 0; 11/12

Ordering Information appears at end of data sheet.

Windows XP, Windows Vista, and Windows are registered

trademarks and registered service marks of Microsoft

Corporation.

*Since 16 bits is 65,535 levels, the LSB is 45.8μV. Depending on

how clean the computer’s USB power is, it may be necessary to

provide clean analog power for the best accuracy.

DESIGNATION QTY DESCRIPTION

C1, C2,

C5–C7, C9

1µF±10%,10VX5Rceramic

capacitors(0603)

TDKC1608X5R1A105K

C3 1

0.01µF±10%,50VX7Rceramic

capacitor(0603)

TDKCGA3E2X7R1H103K

C4,C8,

C12–C14

0.1µF±10%,16VX7Rceramic

capacitors(0603)

MurataGRM188R71C104KA01J

C10,C11 2

18pF±5%,50VC0Gceramic

capacitors(0603)

TDKC1608C0GH1180JT

FB1 1

Ferritebead(0805)

TDKMMZ20112Y601BT

DESIGNATION QTY DESCRIPTION

J1 1

Mini-USBtype-Breceptacle

Mill-Max897-43-005-00-100001

J2 0

Notinstalled,10-pin(5x2)

header,0.1in

J3 0 Notinstalled,1-pinheader,0.1in

J4 0 Notinstalled,1-pinheader

J5,J7,J8 4

Turret terminal pins

Mill-Max

2108-2-00-44-00-00-07-0

J6 0

Notinstalled,4-pinheader

J9 0

Notinstalled,RF-coaxSMA

connector

Molex733910060

Summary of content (11 pages)

PAGE 1
Evaluates: MAX5216 MAX5216DACLite Evaluation Kit General Description The MAX5216DACLite evaluation kit (EV kit) enables evaluation of the MAX5216 single-channel, low-power, buffered-output, 3-wire SPI interface, 16-bit DAC. The EV kit also includes Windows XPM-, Windows VistaM-, and WindowsM 7-compatible software that provide a simple graphical user interface (GUI) for exercising the features of the IC. The EV kit enables a quick evaluation of the device, with a fixed supply voltage of 3.3V.
PAGE 2
Evaluates: MAX5216 MAX5216DACLite Evaluation Kit Component List (continued) DESIGNATION QTY R1, R2, R10 3 27Ω ±1% resistors (0603) YAGEO RC0603FR-0727RL R3 1 1kΩ ±1% resistor (0603) Panasonic ERJ-3EKF1001V R4–R9 6 0Ω ±1% resistors (0603) YAGEO RC0603FR-070RL U1 1 16-bit VOUT DAC (8 µMAX®) Maxim MAX5216GUA+ 1 16-bit microcontroller with USB 2.0 interface (64 LQFP) Maxim MAXQ622G-0000+ U2 DESCRIPTION DESIGNATION QTY DESCRIPTION U3 1 3.
PAGE 3
Evaluates: MAX5216 MAX5216DACLite Evaluation Kit Figure 1. USB Input Device Properties Figure 2. MAX5216DACLite EV Kit (Single Operation Tab) www.maximintegrated.
PAGE 4
Evaluates: MAX5216 Detailed Description of Software Single Operation Tab The Single Operation tab sheet (Figure 2) is active by default. The application checks all the boards with the USB VID/PID 0x0B6A/0x1234 that connected to the PC and indicates them on the right side of the GUI. Up to 16 boards can be connected to the system. Each board has its own unique board index. Select the appropriate board index in the Board Index spin box (Figure 3). Any possible operation can be evaluated on this tab sheet.
PAGE 5
Evaluates: MAX5216 MAX5216DACLite Evaluation Kit Figure 4. Notation Selection Dialog Box Figure 5. Sine-Wave Generator www.maximintegrated.
PAGE 6
Evaluates: MAX5216 MAX5216DACLite Evaluation Kit Figure 6. Staircase Plot Detailed Description of Hardware The MAX5216DACLite EV kit board is loaded with the MAX5216, Maxim’s best-in-class, lowest power, 16-bit DAC. The on-board MAX6133A30 provides low noise, low temperature drift of 3ppm/°C, and 3.000V precise voltage reference for the DAC. The MAX5216 (U1) receives a command from the 16-bit MAXQ622 microcontroller (U2) through a 3-wire high-speed SPI bus.
PAGE 7
Evaluates: MAX5216 The evaluation software allows full access to the DAC’s functions and features through the full-speed USB 2.0 bus and the U2 microcontroller. The microcontroller is preloaded with firmware that communicates with the GUI. MAX5216Lite Extended Features The U1 device can be evaluated over the full voltage and SPI bus speed range with external power supply and SPI host controller.
PAGE 8
GND ID USBDP USBDM VBUS R2 3 5 4 R1 2 TDI TCK TDO TMS GND GND RST R4 0 +3V3 RST USBDP USBDM C4 0.1uF R3 1k MAX8510 C3 0.01uF +5V USBDM USBDP 4 5 * Optional, may not be populated HEADER5x2_JTAG 1 2 3 4 5 6 7 8 9 10 J2 27 27 FB1 FERRITE BEAD 2 1 1 MINIUSB-B-RECEPT J1 +5V C1 1uF U4 IN OUT SHDN GND BP +3V3 C2 1uF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 IRRX P0.0/IRTXM P0.1/RX0 P0.2/TX0 P0.3/RX1/SDA P0.4/TX1/SCL P0.5/TBA0/TBA1 GND_0 P0.6/TBB0 P0.7/TBB1 P2.0/MOSI0 P2.
PAGE 9
Evaluates: MAX5216 1.0” Figure 9. MAX5216DACLite EV Kit Component Placement Guide—Top www.maximintegrated.com MAX5216DACLite Evaluation Kit 1.0” Figure 10.
PAGE 10
Evaluates: MAX5216 MAX5216DACLite Evaluation Kit Ordering Information PART MAX5216DACLITE# TYPE EV Kit #Denotes RoHS compliant. www.maximintegrated.
PAGE 11
Evaluates: MAX5216 MAX5216DACLite Evaluation Kit Revision History REVISION NUMBER REVISION DATE 0 11/12 DESCRIPTION Initial release PAGES CHANGED — For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied.