Datasheet

MAX551/MAX552
+3V/+5V, 12-Bit, Serial, Multiplying DACs
in 10-Pin µMAX Package
The MAX551/MAX552 have high-impedance digital
inputs. To minimize noise pickup, tie them to either V
DD
or GND when they are not in use. As a good practice,
connect active inputs to V
DD
or GND through high-
value resistors (1MΩ) to prevent static charge accumu-
lation if the pins are left floating, such as when a circuit
card is left unconnected.
The CLR input on the µMAX device has an internal pull-
up resistor with a typical value of 125kΩ. If the CLR
input is not used, tie it to V
DD
to minimize supply current.
V
DD
V
BIAS
V
IN
AGND
REF
OUT
GND
MAX551
MAX552
Figure 8. AGND Bias Current
_Ordering Information (continued)
___________________Chip Information
TRANSISTOR COUNT: 887
SUBSTRATE CONNECTED TO V
DD
PART
MAX552ACPA
MAX552BCPA
MAX552ACUB 0°C to +70°C
0°C to +70°C
0°C to +70°C
TEMP RANGE
PIN-
PACKAGE
8 Plastic DIP
8 Plastic DIP
10 µMAX
MAX552BCUB
MAX552AEPA
MAX552BEPA -40°C to +85°C
-40°C to +85°C
0°C to +70°C 10 µMAX
8 Plastic DIP
8 Plastic DIP
MAX552AEUB -40°C to +85°C 10 µMAX
MAX552BEUB -40°C to +85°C 10 µMAX
LINEARITY
(LSB)
±1/2
±1
±1/2
±1
±1/2
±1
±1/2
±1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2002 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Package Information
For the latest package outline information, go to
www.maxim-ic.com/packages.