Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsLinear ICsLinear IC - Comparator + voltage ref circuit Push pull SOT 23 5

General Description

The MAX9060–MAX9064 are small single comparators,

ideal for a wide variety of portable electronics applications

such as cell phones, media players, and notebooks that

have extremely tight board space and power constraints.

These comparators are offered in both, a miniature

4-bump UCSP™ package with a 1mm x 1mm footprint (as

small as two 0402 resistors), and a 5-pin SOT23 package.

The MAX9060–MAX9064 feature an input voltage range

of -0.3V to +5.5V independent of supply voltage. These

devices maintain high impedance at the inputs even when

powered down (V

or V

REF

= 0V). They also feature

internal filtering to provide high RF immunity.

The MAX9060 and MAX9061 have open-drain outputs and

draw quiescent supply current from a user-supplied refer-

ence voltage, V

REF

, between 0.9V and 5.5V. These devic-

es consume only 100nA (max) supply current and operate

over the extended -40°C to +85°C temperature range.

The MAX9062, MAX9063 and MAX9064 are single com-

parators with an internal 0.2V reference. These devices

feature either a push-pull or an open-drain output. They

consume only 700nA (max) supply current. The MAX9062,

MAX9063, and MAX9064 operate down to V

= 1V over

the extended -40°C to +85°C temperature range.

Applications

● Cell Phones

● Portable Media Players

● Electronic Toys

● Notebook Computers

● Portable Medical Devices

Features

● Tiny 1mm x 1mm x 0.6mm 4-Bump UCSP

● Footprint = Two 0402 Resistors

● Also Available in a 5-Pin SOT23 Package

● Ultra-Low Operating Current (100nA max)

● Input Voltage Range = -0.3V to +5.5V

● External REF Range = 0.9V to 5.5V

(MAX9060/MAX9061)

● Internal REF Voltage = 0.2V

(MAX9062/MAX9063/MAX9064)

● 15μs Propagation Delay

● -40°C to +85°C Extended Temperature Range

Selector Guide and Typical Operating Circuits appears at

end of data sheet.

Note: All devices are specified over the extended -40°C

to+85°C operating temperature range.

+Denotes a lead(Pb)-free/RoHS-compliant package.

/V denotes an automotive qualified device.

T = Tape and reel.

G45 = Protective die coating.

UCSP is a trademark of Maxim Integrated Products, Inc.

PART PIN PACKAGE TOP MARK

MAX9060EBS+G45 4 UCSP AFX

MAX9060EUK+ 5 SOT23 AFFG

MAX9061EBS+G45 4 UCSP AFY

MAX9061EUK+ 5 SOT23 AFFH

MAX9062EBS+G45 4 UCSP AFZ

MAX9062EUK+ 5 SOT23 AFFI

MAX9063EBS+G45 4 UCSP AFA

MAX9063EUK+ 5 SOT23 AFFJ

MAX9063EUK/V+T 5 SOT23 +AMGH

MAX9064EBS+G45 4 UCSP AFB

MAX9064EUK+ 5 SOT23 AFFK

MAX9060–MAX9064

MAX9060–

MAX9064

UCSP SOT23

REF = MAX9060/MAX9061

) = MAX9062–MAX9064

TOP VIEW (BUMPS ON BOTTOM)

B1 B2

GND

OUT

REF

)

REF

)

GND

OUT

GND

MAX9060–MAX9064 Ultra-Small, Low-Power Single

Comparators in 4-Bump UCSP and 5 SOT23

19-4105; Rev 6; 12/14

Ordering Information

Pin Congurations

EVALUATION KIT AVAILABLE

Summary of content (10 pages)

PAGE 1
EVALUATION KIT AVAILABLE MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 General Description The MAX9060–MAX9064 are small single comparators, ideal for a wide variety of portable electronics applications such as cell phones, media players, and notebooks that have extremely tight board space and power constraints.
PAGE 2
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 Absolute Maximum Ratings VCC, REF, IN to GND...............................................-0.3V to +6V OUT to GND (MAX9060–MAX9063)........................-0.3V to +6V OUT to GND (MAX9064 Only)............... -0.3V to + (VCC + 0.3V) Output Short-Circuit Current Duration.................................... 10s Input Current into Any Terminal.........................................
PAGE 3
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 MAX9062/MAX9063/MAX9064 Electrical Characteristics (VCC = 3.3V, RPULLUP = 10kΩ to VPULLUP = 3.3V for MAX9062/MAX9063, TA = -40°C to +85°C. Typical values at TA = +25°C, unless otherwise noted.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS +5.5 V DC CHARACTERISTICS Input Voltage Range Input Bias Current Input Leakage Current Output Voltage Low VIN Guaranteed by IIN test IIN VIN = 0.2V to 5.
PAGE 4
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 Typical Operating Characteristics (VCC = 3.3V, VREF = 1.8V, RPULLUP = 10kΩ to VPULLUP = 3.3V for MAX9060–MAX9063, VGND = 0V, TA = +25°C, unless otherwise noted.) +85C +25C 50 400 200 1 2 3 4 5 0 6 0 1 REF VOLTAGE (V) VCC = 5V 10 VCC = 3.3V VCC = 1.8V 1.0 0.1 10 0.5 VCC/VREF = 5V 0.4 0.3 VCC/VREF = 3.3V VCC/VREF = 1.8V 4 2 6 0.5 0.4 0.3 0.2 0.1 -15 10 35 TEMPERATURE (C) www.maximintegrated.
PAGE 5
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 Typical Operating Characteristics (continued) (VCC = 3.3V, VREF = 1.8V, RPULLUP = 10kΩ to VPULLUP = 3.3V for MAX9060–MAX9063, VGND = 0V, TA = +25°C, unless otherwise noted.) -10 -15 0.10 201.5 201.4 201.3 201.2 0.20 0.25 201.0 0.30 MAX9060 toc12 201.0 200.8 200.6 200.4 200.2 200.0 199.8 199.6 199.4 199.2 -40 -15 10 35 60 85 199.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.
PAGE 6
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 Typical Operating Characteristics (continued) (VCC = 3.3V, VREF = 1.8V, RPULLUP = 10kΩ to VPULLUP = 3.3V for MAX9060–MAX9063, VGND = 0V, TA = +25°C, unless otherwise noted.) MAX9064 1kHz FREQUENCY RESPONSE MAX9060 1kHz FREQUENCY RESPONSE MAX9060 toc18 MAX9060 toc19 VCC = 3.3V VREF = 1.8V VPULLUP = 3.3V 250mV 1.9V IN+ 50mV/div 200mV 150mV IN+ 100mV/div 1.8V 1.
PAGE 7
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 Pin/Bump Description BUMP PIN UCSP SOT23 MAX9060 MAX9061 MAX9062 MAX9063 MAX9064 MAX9060 MAX9061 MAX9062 MAX9063 MAX9064 NAME A1 A1 5 5 OUT A2 A2 4 4 IN Comparator Input. The MAX9060, MAX9062, and MAX9064 have noninverting inputs. The MAX9061 and MAX9063 have inverting inputs. — B1 — 1 VCC Power-Supply Voltage. Bypass to ground with a 0.1µF bypass capacitor.
PAGE 8
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 Table 1. How Devices Behave Under Various Input Voltage Conditions PART INPUT VOLTAGE CONDITIONS MAX9060 MAX9061 ACTION AT OUTPUT VIN > VREF External pullup resistor pulls output high. VIN < VREF Output asserts low. VIN > VREF Output asserts low. VIN < VREF External pullup resistor pulls output high. VIN > 0.2V External pullup resistor pulls output high. VIN < 0.2V Output asserts low. VIN > 0.
PAGE 9
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 Typical Operating Circuits VDD 0.9V TO 5.5V REF VDD INTERNAL PULLUP MAX9060 OUT I/O IN 0.9V TO 5.5V MAX9061 OUT I/O VDD MICROCONTROLLER VCC = 1.0V TO 5.5V INTERNAL PULLUP MAX9062 0.2V REF 0.2V REF VDD INTERNAL PULLUP MAX9063 OUT I/O IN INTERNAL PULLUP IN MICROCONTROLLER VCC = 1.0V TO 5.5V REF OUT I/O MICROCONTROLLER IN MICROCONTROLLER VCC = 1.0V TO 5.5V VDD MAX9064 0.
PAGE 10
MAX9060–MAX9064 Ultra-Small, Low-Power Single Comparators in 4-Bump UCSP and 5 SOT23 Revision History REVISION NUMBER REVISION DATE PAGES CHANGED 0 5/08 Initial release — 1 1/09 Corrected ultra-low operating current value 1 2 10/10 Updated TOC 4 labels 4 3 12/10 Added G45 designation 1 DESCRIPTION 4 3/11 Updated Note 6 3 5 8/12 Added automotive package MAX9064EUK/V+T to Ordering Information 1 6 12/14 Added automotive package MAX9063EUK/V+T to Ordering Information and removed