Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsDev KitsPCB design board

_______________________________________________________________ Maxim Integrated Products 1

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.

MAX9259 Evaluation Kit

Evaluates: MAX9259

General Description

The MAX9259 evaluation kit (EV kit) provides a proven

design to evaluate the MAX9259 gigabit multimedia

serial link (GMSL) with spread spectrum and full-duplex

control channel. The EV kit also includes Windows

2000, Windows XP

-, and Windows Vista

-compatible

software that provides a simple graphical user interface

(GUI) for exercising the features of the MAX9259.

The MAX9259 EV kit comes with a MAX9259GCB/V+

installed.

For complete GMSL evaluation, order both the MAX9259

EV kit and its companion board, the MAX9260 EV kit.

Features

S Accepts 29-Bit Parallel Video and I

S Audio

S On-Board S/PDIF-to-I

S Audio Converter

S Windows 2000-, Windows XP-, and Windows Vista

(32-Bit)-Compatible Software

S USB-PC Connection (Cable Included)

S USB Powered

S Proven PCB Layout

S Fully Assembled and Tested

Ordering Information

Component List

19-5019; Rev 1; 4/10

Windows, Windows XP, and Windows Vista are registered trademarks of Microsoft Corp.

+Denotes lead(Pb)-free and RoHS compliant.

Note: The MAX9259 EV kit should be ordered with its com-

panion board, the MAX9260 EV kit.

PART TYPE

MAX9259EVKIT+ EV Kit

DESIGNATION QTY DESCRIPTION

C1–C7 7

0.01FF Q10%, 25V X7R ceramic

capacitors (0402)

Murata GRM155R71E103K

C8–C14, C17,

C101–C105,

C111, C121,

C131, C141,

C151, C211–

C214, C221,

C231, C241,

C251

0.1FF Q10%, 16V X7R ceramic

capacitors (0603)

TDK C1608X7R1C104K

C15, C16 2

0.22FF Q10%, 50V X7R ceramic

capacitors (0805)

Murata GRM21BR71H224K

C21, C261 2

4.7FF Q20%, 25V X7R ceramic

capacitors (1206)

Murata GCM31CR71E475M

C22, C24, C25,

C26, C109,

C262, C264,

C267

10FF Q20%, 16V X5R ceramic

capacitors (1206)

Murata GRM31CR61C106M

C23, C263 0 Not installed, capacitors (1206)

DESIGNATION QTY DESCRIPTION

C106, C107,

C122, C123

22pF Q5%, 50V C0G ceramic

capacitors (0603)

Murata GRM1885C1H220J

C108, C265,

C268

1FF Q10%, 16V X5R ceramic

capacitors (0603)

TDK C1608X5R1C105K

C110 1

0.033FF Q10%, 25V X7R

ceramic capacitor (0603)

Murata GRM188R71E333K

C201, C202,

C203

1FF Q20%, 6.3V X5R ceramic

capacitors (0402)

TDK C1005X5R0J105M

C205, C206,

C232, C266,

C269

0.01FF Q5%, 25V C0G ceramic

capacitors (0603)

TDK C1608C0G1E103J

C207 1

1000pF Q10%, 50V X7R

ceramic capacitor (0805)

Murata GCM216R71H102K

C208 1

0.022FF Q10%, 25V X7R

ceramic capacitor (0402)

TDK C1005X7R1E223K

C233 0 Not installed, capacitor (0603)

Summary of content (26 pages)

PAGE 1
9-5019; Rev 1; 4/10 MAX9259 Evaluation Kit Features The MAX9259 evaluation kit (EV kit) provides a proven design to evaluate the MAX9259 gigabit multimedia serial link (GMSL) with spread spectrum and full-duplex control channel. The EV kit also includes WindowsM 2000, Windows XPM-, and Windows VistaM-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX9259.
PAGE 2
Evaluates: MAX9259 MAX9259 Evaluation Kit Component List (continued) DESIGNATION QTY H1 1 72-pin header (2 x 36) J1 1 High-speed automotive connector Rosenberger D4S20F-40MA5-Z J2, J3, J23 J4 J5 DESCRIPTION QTY DESCRIPTION 12 1kI Q5% resistors (0603) R101, R102 2 27I Q5% resistors (0603) 0 Not installed, SMA connectors R103 1 1.
PAGE 3
MAX9259 Evaluation Kit DESIGNATION U21 U22 U23, U24 U25 U26 QTY DESCRIPTION Y1 0 Y10 1 6MHz crystal (HCM49) Hong Kong X’tals SSL60000N1HK188F0-0 Y12 1 14.7456MHz crystal (HCM49) Hong Kong X’tals SSM14745N1HK188F0-0 Y23 1 12MHz, 3.3V low-jitter clock (7mm x 5mm) Schmitt trigger buffer (5 SC70) Fairchild NC7SV17P5X_NL (Top Mark: V17) — 1 USB high-speed A-to-B cables, 6ft — 22 Shunts 3.
PAGE 4
Evaluates: MAX9259 MAX9259 Evaluation Kit Quick Start 7) Connect the USB cable from the PC to the MAX9259 EV kit board (direct 500mA connection required; do not use a hub). A New Hardware Found window pops up when installing the USB driver for the first time. If a window is not seen that is similar to the one described above after 30s, remove the USB cable from the board and reconnect it. Administrator privileges are required to install the USB device driver on Windows.
PAGE 5
MAX9259 Evaluation Kit 18) In the software’s MAX7324 tab (Figure 4), press the Search for MAX7324 button. Verify that the MAX7324 Device Address drop-down list shows 0xDA (JU151=1-2 JU152=1-2). 19) Press the LED151-LED158 ON button. Verify that MAX9260 EV kit LED151–LED158 turn on. 20) Press the LEDs Alternating button. Verify that MAX9260 EV kit LED151, LED153, LED156, and LED158 turn off. 21) GPIO Demo: In the software’s MAX9260 tab (Figure 3), scroll down to Register 0x06.
PAGE 6
Evaluates: MAX9259 MAX9259 Evaluation Kit the specified device register. Read Register reads the specified device register and reports the results into the Interface History window. Devices that are not registerbased (such as the MAX7324) are supported by Send Data (no register) and Receive Data (no register). User-supplied devices requiring other interface protocols must use Raw TX byte codes to communicate.
PAGE 7
MAX9259 Evaluation Kit Firmware command “T” supports waking up the MAX9259 from the MAX9260 side of the link. Command “T” performs a dummy read, followed by a delay on the order of 1ms to 8ms, and finally writes a register value. For example, send “T810558800483” to read from device address 0x81 register 0x05, delay 4ms, then write to device address 0x80 register 0x04 data 0x83. This is the MAX9259 wake up sequence for the default device addresses.
PAGE 8
Evaluates: MAX9259 MAX9259 Evaluation Kit Table 1.
PAGE 9
MAX9259 Evaluation Kit JUMPER SIGNAL SHUNT POSITION JU192 AUDIOSDA 1-2* JU193 AUDIOSCL JU194 AUDIOSDA JU210 U21 OE JU211 I2S WS JU212 I2S SCK JU213 I2S SD JU214 I2S MCLK JU261 VMOD Open 1-2* Open 1-2* Open 1-2* Open Not installed* Open Not installed* Open Not installed* Open Not installed* Open 1-2* Open DESCRIPTION U12 sends I2C initialization commands to audio chip U20 Disconnects audio I2C bus U12 sends I2C initialization commands to audio chip U20 Disconnects audio I2C bus pullup
PAGE 10
Evaluates: MAX9259 MAX9259 Evaluation Kit Figure 1.
PAGE 11
MAX9259 Evaluation Kit Evaluates: MAX9259 Figure 2.
PAGE 12
Evaluates: MAX9259 MAX9259 Evaluation Kit Figure 3.
PAGE 13
MAX9259 Evaluation Kit Evaluates: MAX9259 Figure 4.
PAGE 14
Evaluates: MAX9259 MAX9259 Evaluation Kit Figure 5.
PAGE 15
MAX9259 Evaluation Kit Evaluates: MAX9259 Figure 6.
PAGE 16
Evaluates: MAX9259 MAX9259 Evaluation Kit Figure 7.
PAGE 17
MAX9259 Evaluation Kit Evaluates: MAX9259 Figure 8a.
PAGE 18
Evaluates: MAX9259 MAX9259 Evaluation Kit Figure 8b.
PAGE 19
MAX9259 Evaluation Kit Evaluates: MAX9259 Figure 8c.
PAGE 20
Evaluates: MAX9259 MAX9259 Evaluation Kit Figure 8d.
PAGE 21
MAX9259 Evaluation Kit Evaluates: MAX9259 1.0” Figure 9.
PAGE 22
Evaluates: MAX9259 MAX9259 Evaluation Kit 1.0” Figure 10.
PAGE 23
MAX9259 Evaluation Kit Evaluates: MAX9259 1.0” Figure 11.
PAGE 24
Evaluates: MAX9259 MAX9259 Evaluation Kit 1.0” Figure 12.
PAGE 25
MAX9259 Evaluation Kit Evaluates: MAX9259 1.0” Figure 13.
PAGE 26
MAX9259 Evaluation Kit Evaluates: MAX9259 Revision History REVISION NUMBER REVISION DATE 0 10/09 Initial release — 1 4/10 Updated jumper JU10 in Table 1 7 DESCRIPTION PAGES CHANGED Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.