Datasheet

Maxim Integrated

│

www.maximintegrated.com

MAXQ610 Evaluation Kit

Evaluates: MAXQ610

MAX-IDE

MAX-IDE is the primary IDE used to program the MAXQ610

using assembly code. The latest version of MAX-IDE can

be obtained from the MAXQ Development Tools web-

page at www.maximintegrated.com/MAXQ_tools. Once

installed, open MAX-IDE and create a new project (Figure

12).

Select MAXQ JTAG under the Device menu and open

the Options menu. From this menu, enter the appropriate

COM port for the USB-to-JTAG/1-Wire Adapter. For the

Device Configuration File, locate MAXQ61x.cfg in the

EV Kit Resource Package (Figure 13).

The project is now configured for the MAXQ610. Assembly

files can be added to the project and loaded onto the EV

kit using the IDE. The included examples come with the

project files inside of the bin directory and the assem-

bly source files are included in the src directory. After

configuring the project with the steps above, the debug-

ger is ready to assemble the code and load it onto the

MAXQ610.

Figure 12. MAX-IDE Project

Figure 13. MAX-IDE Device Options