Datasheet

placed inside a Xilinx Zynq system-on-chip (SoC). The FPGA project files for the ZedBoard platform are located under Firmware
Files in the All Design Files section.
The firmware is a working example of how to initiate the system and continuously read and display the MAX31911 register values.
The simple process flow is shown in Figure 3. The firmware is written in C using the Xilinx SDK tool, which is based on the Eclipse
open source standard. Custom Corona-specific design functions were created utilizing the standard Xilinx XSpi core version 3.03a.
The SPI clock frequency is set to 3.125MHz.
Figure 3. The Corona firmware flowchart for ZedBoard platform.
The complete source code is provided to speed up customer development. Code documentation can be found with the
corresponding firmware platform files.
Quick Start
Required equipment:
Windows
®
PC with one USB port
Corona (MAXREFDES12#) board
Corona-supported platform (i.e., Nexys 3 development kit or ZedBoard kit)
One 24V 1A DC power supply
Download, read, and carefully follow each step in the appropriate Corona Quick Start Guide:
Corona (MAXREFDES12#) Nexys 3 Quick Start Guide
Corona (MAXREFDES12#) ZedBoard Quick Start Guide
Lab Operation
The following picture illustrates a test case for system operation on the ZedBoard platform. A 24V DC supply is applied on the TP3
Page 4 of 6