Datasheet

Figure 5. Novato calibration GUI.
The GUI is user friendly and easy to navigate. Just follow the tips in the Status box.
Step 1: Disable main loop to allow communication to the sensor by selecting the Calibration Mode checkbox. Note all functions are
disabled (grayed) until Calibration mode is enabled.
Step 2:
Select RTD.
In the Calibration tab, clicking the "RTD Settings" button opens the RTD Settings window, Figure 6. Then select the appropriate R
0
resistance at 0°C of RTD, which is going to be connected to the Novato board, e.g. 100½, gain, max and min temperature.
Page 5 of 10