Datasheet

Maxim Integrated │ 13
www.maximintegrated.com
USB2PMB1# Adapter Board
Evaluates: Munich (USB2PMB1#)
Fresno GUI Tab
This environment consists of the internal block diagram of
the Fresno board and the remainder of the operations to
perform (Figure 15):
● Discrete/Continuous Sampling
● Averaging
● Choose Sampling Rate and Number of Samples
● View/Save Plots
● Calibrate
● Plot view options
7) Sampling
a) Sample: This pushbutton tab allows discrete
sampling.
b) Sample Continuously: This feature allows
continuous sampling. Once the Sample
Continuously button is clicked the button
changes its text to Stop Sampling and the
user would not be able to disconnect the board
from the software until the user clicks the Stop
Sampling button.
c) Sample Rate: This drop-down box option
allows the user to choose the sample rate or
the number of samples per second.
d) No of Samples: This drop-down box option
allows the user to choose the number of sam-
ples to be sampled.
e) Build Average of: Drop-down box menu to
choose to average of the discrete values
sampled. For instance, if 16 is selected, it takes
the first 16 samples of the sample-shot the user
takes, then averages them and shows the num-
ber in the text box below. If history is selected
as well, it adds this number as a datapoint
to the history. If all is selected, it uses all the
samples taken, as selected in No. of Samples,
to build the average.
Figure 15. Munich/Fresno GUI
Figure 15