Datasheet

Maxim Integrated │ 4
www.maximintegrated.com
USB2PMB1# Adapter Board
Evaluates: Munich (USB2PMB1#)
Scan and Select
For instance, Figure 5 depicts the scanning and available
Munich devices connected. The software has identified
two devices:
a) PMOD000017A
b) PMOD000019A
Within the tab sheet, press the Connect PMOD button
and verify that the button changes its text to Disconnect
PMOD and the status bar at the bottom indicates that the
companion board is connected. See Figure 6.
Connecting Multiple Boards
When connecting multiple boards such as Campbell
and Cupertino at the same time to two separate Munich
boards, perform Steps 1 to 3 for each device one after
the other.
Figure 7 depicts Campbell and Cupertino being con-
nected to two Munich adaptor boards at the same time.
Campbell GUI Tab
This environment contains the internal block diagram of
Campbell board and the remainder of the operations to
perform, including the following:
● Discrete/Continuous Sampling
● Averaging
● Choose Sampling Rate and Number of Samples
● View/Save Plots
● Calibrate
● Plot View Options
Figure 6. Campbell Connected to Munich GUI
Figure 6