Assembly Instruction

2.)
1.)
3.)
Bracket Mounting Screws(4Pcs)(A) Chain (D) (E)
Step1:Remove mounting bracket from
fixture and install to electrical box.
Step2:Rotate the bent tube to the suitable position.
Step3:Place shade on the Coupler and tighten with the
Nipple.Install top loop to center stem and attach appropriate
amount of chain to loop to achieve desired mounting height.
Thread wire through every 3rd loop of chain.Remove ring
from loop and slide down chain. Place canopy onto chain
and let slide to top of fixture. Install nipple and cross bar into
top of chain loop. Wire fixture to wires in outlet box. Copper
wire is for Ground. Pull canopy through screw ring up chain
to ceiling and tighten securely.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Bent tube
A
A
C
B
D
E
E
B
B
D
C
C
Nipple
Nipple
Shade
Canopy Loop(B) (C)
Shade
Coupler
Coupler