MAXIM® L1 6 TIGHT NG PRODUCT NAME: Port side ILT ceiling NUMBER: 101800IAB Please consult your electrician for Hang fixture and wiring.
IMPORTANT: Turn off power at the main fuse or circuit breaker box before starting installation T . — (A)Bracket {B)Ball nut (C)Body Locate all hardware & components before discarding packaging o S Step. 1: Remove mounting bracket (A) from fixture and install to electrical box. 2.) Step. 2: Wire fixture to wires in outlet box. Copper/Green wire is for Ground. Step. 5;: Install fixture to bracket and tighten ball nuts (B) on the canopy to secure. Cleaning & Care: Clean with soft cloth and a mild detergent.
IMPORTANT: Turn off power at the main fuse or circuit breaker box before starting installation & e & (B)Glass (F)Ring (©nut S Locate all hardware & components before discarding packaging 5.) %, Step. 5: Install the bull. I o f ¢c—* Step. 5: Put glass(E) into ring(F), then GJ use nut(G) lock ring and glass on body(C). Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
