—~ .
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation T = (A) Bracket (B) Canopy (C) Chain (D) Body (E)Glass tube Locate all hardware & components before discarding packaging A = H I =~ Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. Step. 1: Remove mounting bracket (A) from fixture and install to electrical box. Step. 2: Screw up the stem (F) on the 3.) Step. 3: bottom of fixture.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation (F)Stem () Nut (I)Wrench (G)Bottom Frame (J)Screw Part Locate all hardware & components before discarding packaging AT B E Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. 4.) Step. 4: 5.) Step.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation Locate all hardware & components before discarding packaging A = o Foil Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. @)neutral (Positive 6.) A (green wire) Step. 6: Wire fixture to wires in outlet box. remove ring from loop and slide down chain. Place canopy onto chain and let slide to top of fixture. install nipple and cross bar into top of chain loop.
