—~ .
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation Bracket (B) Canopy (C) Chain (D)Body (E)Glass tube Locate all hardware & components before discarding packaging Step. 1: Remove mounting bracket (A) from fixture and install to electrical box. A | —F Step. 2:Srcew up the stem (F) on the bottom of fixture. Step. 3: Install the frame(G) on another side H of stem(F), then use Wrench(I) to tighten nut (H) to lock the frame on the bottom of Fixture.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation (F)Stem (G)Bottom Frame () Nut (J)Screw Part Locate all hardware & components before discarding packaging Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. 4.) Step. 4: 5.) Step. Install the glass tube(E) across the hole on the top frame until one side of glass tube into the hole which on the bottom, then screw down the Part(]) into the hole which on the top frame.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation Locate all hardware & components before discarding packaging Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. @)neutral (Positive 6.) A (green wire) Step. 6: Wire fixture to wires in outlet box. remove ring from loop and slide down chain. Place canopy onto chain and let slide to top of fixture. install nipple and cross bar into top of chain loop.
