~~ MAXIM PRODUCT NAME: Lu cent SLT Pendant NUMBER: 16106 Please consult your electrician for Hang fixture and wiring Bulb (Not included) :8+CA 60W MADE IN CHINA Page 1 of (4)
IMPORTANT: Turn off power at the main fuse or circuit breaker box before starting installation 0 (A) Canopy (B) Stems (C) Body (D)Glass tube Locate all hardware & components before discarding packaging _RSFSR Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. 1.) Step. 1: Remove mounting bracket (6) from fixture and install to electrical box. 2.) al Step. 2: Install the part (G)on the bottom of fixture, follow above drawing. Step.
IMPORTANT: Turn off power at the main fuse or circuit breaker box before starting installation gibed died — v (E) Part (F) Stems (G)) Part Locate all hardware & components before discarding packaging 127%3PCS Step. 4: After put the glass MN . the part (E), put another side of B——— the glass into part(G) which on & top and bottom of the fixture. A And use lock the screw which on the side of part (G). Step. 5: Run wire through stems (B)and combine stem lengths to meet desired mounting height.
IMPORTANT: Turn off power at the main fuse or circuit breaker box before starting installation oo TT (H)Ball nut (I)Bracket Locate all hardware & components before discarding packaging _RSFSR Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. 6.) Step. 6: Wire fixture to wires in outlet 7.) box. Copper/Green wire is for Ground. AT = ode——H <> Step. 7: Install fixture to bracket and tighten ball nuts (H) on the canopy to secure.
