—~ .
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation =T H () Canopy (B)Stems (C)Body (D)Glass tube Locate all hardware & components before discarding packaging o . B—— Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. 1.) Step. 1: Remove mounting bracket (G) from fixture and install to electrical box. 2.) @t Step. 2:Install the the bottom of fixture, follow above drawing. %v;% : Z D Step.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation 1 died — v (E) Part (F)Stems (G))Part Locate all hardware & components before discarding packaging 127%3PCS v &\\v B— " Step. 4: After put the glass N . the another side of B——— the glass into part(G) which on ¢ top and bottom of the fixture. 685— And use lock the screw which on the side of part (G). Step. 5: Run wire through combine stem lengths to meet desired mounting height.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation oo T (H)Ball nut (I)Bracket Locate all hardware & components before discarding packaging o . B—— 3//% ® G Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. 6.) Step.6: Wire fixture to wires in outlet 7.) box. Copper/Green wire is for Ground. Agl = ode——H <> Step. 7: Install fixture to bracket and tighten ball nuts (H) on the canopy to secure.
