Assembly Instruction

PRODUCT NAME: MALAGA 3-LIGHT INVERT BOWL PENDANT

ITEM NUMBER: 2682

Please consult a qualified electrician for hanging fixture and wiring.

Page 1 of (4)

Light Source : 3 x E26 Medium Base 60W (Not Included)

Made in China / Hecho en China / Fabrique en China

PAGE 1
PRODUCT NAME: MALAGA 3-LIGHT INVERT BOWL PENDANT ITEM NUMBER: 2682 Please consult a qualified electrician for hanging fixture and wiring.
PAGE 2
Before Getting Started Antes de comenzar Avant de commencer Read the instructions carefully prior to assembling the product. Lire attentivement les instructions avant d'assembler le produit. Lea atentamente las instrucciones antes de ensamblar el producto. When you open the package with a sharp tool like a cutter knife,be careful not to damage the components inside. Lorsque vous ourez le paquet avec un outil pointu comme un couteau de coupe,veillez à ne pas endommager les composants à l'intérieur.
PAGE 3
EN Contents Before getting,started,ensure the package contains the following components: Antes de comenzar,asegurese de que el paquete contenga los siguientes componentes: x1 A x1 G Ball Nut CANOPY x1 B Avant de commencer,assurez-vous qu le paquet contient les composants suivants: H x1 GLS2682XX SCREW RING x1 I CAP x1 C CHAIN FIXTURE x1 D x3 J x1 K LOOP MOUNTING BRACKET x6 E x1 L MOUNTING SCREW LIGHT POLE x6 F M x3 WIRE NUT LIGHT POLE Page 3 of (4)
PAGE 4
1. Attach appropriate amount of chain to loop to achieve desired mounting height.Thread wire through every 3rd loop of chain. Remove screw ring from loop and slide down chain. Place canopy onto chain and let slide to top of fixture.Install mouting bracket into top of chain loop. 2. 3.