MAXIM® L1 6 TIGHT NG PRODUCT NAME: Foundry 6LT Round Pendant NUMBER: 27565BKBWAB Please consult your electrician for Hang fixture and wiring.
IMPORTANT: Turn off power at the main fuse or circuit breaker box before starting installation (A)Bracket (B)Ball nut (C) Canopy (D) Stems (E)Nut (F) screw Locate all hardware & components before discarding packaging Step. 1: Remove mounting bracket (A) from fixture and install to electrical D box. | 12#3PCS Step. 2: Screw each part of 3.) Step. 3: Raised the stem(G) to connect with Part (H), and use nut(E) to secure the body(G) with Stem(I) together.
IMPORTANT: Turn off power at the main fuse or circuit breaker box before starting installation e i (G)Body (H) Part (D stem (J) shade Locate all hardware & components before discarding packaging Step. 4: Run wire through stems (D)and combine stem lengths to meet D desired mounting height. 5.) Step.5: Wire fixture to wires in outlet box. Copper/Green wire is for Ground. Step. 6: Install fixture to bracket and tighten ball nuts (B) on the canopy to secure. 7.
