ne MAXIM Assembly Instruction For 2850 Q Loo (4) MT Fastening Frame (3) ) Tube 0 Ste pd Rope Butterfly Nut (2) Ne Fastening Frame (5) Step.2 Cut the rope (1) and remove them. Step 2 Unscrew the butterfly nuts @. 1 Step 3 Remove the fastening frame (3). Step 4 Put the ring in the tube,then screw In the loop (4) until it’s tighten. Step 5 Lift the lamp ond unscrew the base fastening frame (3) and remove it. Step 6 Screw the ball hut until it’s fully tighten. The lamp is how ready for Installation.
