MAXIM Assembly Instruction For 2852 Loop (4) Tube ® MS Step Fastening Frame Rope (1) Step.2 Butterfly Nuts (2) t Step 1 Base Fastening Frame (5) Cut the rope (1> and remove them, Step 2 Unscrew the butterfly nuts (2). Step 3 Remove the fastening from (3). Step 4 Put the ring in the euthenics screw In the loop (4) until it’s tighten. < Step 5 — Lift the lamp and unscrew the Steps base fastening frame (5) and remove it. Step 7 Screw the ball nut until It's fully tighten.
