TY MAXIM Assembly Instruction For 2855 4> Sy Fastening Frame (3) N Ste pl < % > Rope (DD Step.2 Base Fastening Frame (3) Step 1 Cut the rope (1) and remove them. Step 2 Unscrew the butterfly nuts <2). Step 3 Remove the fastening frame (3) Step 4 Put the ring In the tube ,then screw the loop (4) until It's tighten, Step 5 Lift the lamp and unscrew the Steps base fastening frame (5) and remove it. Step 6 Unscrew the couplet (6) . Step 7 Screw the ball nut until it's Step.6 fully tighten.
