Installation Sheet

PRODUCT NAME: Enquinox

ITEM NUMBER: 39108BCTXBPN

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE

MADE IN CHINA

Page 1 of (2)

Please consult your electrician for hanging fixture and wiring.

H T I N

28* 2.3W G9 LED

This fixture is designed to dim with an

Electronic Low Voltage dimmer. Dimming

levels will vary by dimmer.

Below is a List of Recommended Dimmers:

· Lutron MACL-153M

· Leviton IPL06-10Z

Due to inrush current, wattage should not

exceed 150 Watts of product for a 600 Watt

dimmer.

Warning!This fixture is supplied with an installed

LED driver.These fixtures are dimmable using

standard triac dimmer.For best operation we

recommend using Lutron CL Dimmers.

PAGE 1
L I G H T I N G PRODUCT NAME: Enquinox ITEM NUMBER: 39108BCTXBPN Please consult your electrician for hanging fixture and wiring. This fixture is designed to dim with an Electronic Low Voltage dimmer. Dimming levels will vary by dimmer. Below is a List of Recommended Dimmers: · Lutron MACL-153M · Leviton IPL06-10Z Due to inrush current, wattage should not exceed 150 Watts of product for a 600 Watt dimmer. Warning!This fixture is supplied with an installed LED driver.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (C) (B) (D) (E) Canopy Threaded Ring Anchor Bolts G9 LED Locate all hardware & components before discarding packaging 1.) Step.1: Remove mounting bracket (A) and install to A B C D electtical box.Mark where anchors meet ceiling,remove mounting bracket from ceiling, and then drill holes using 3 16" drill bit where marked(B).