Installation Sheet

Please consult a qualified electrician for hanging fixture and wiring.

Page 1 of (2)

MADE IN CHINA

PRODUCT NAME: Merge 6 Light Pendant Deformed Balls

ITEM NUMBER: 39516

Caution: Xenon bulbs get very hot and may burn

you. Always make sure bulbs are off for a

minimum of 10 minutes before handling. Fixture

may be dimmed using an electronic low voltage

dimmer.

Bulb (included): 6*40W G9 Bulbs

PAGE 1
PRODUCT NAME: Merge 6 Light Pendant Deformed Balls ITEM NUMBER: 39516 Please consult a qualified electrician for hanging fixture and wiring. Caution: Xenon bulbs get very hot and may burn you. Always make sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation Locate all hardware & components before discarding packaging CANOPY 6" x 1pc 12" x 3pcs 1. Remove mounting bracket from fixture and install to electrical box 2. Run wire through stems and combine stem lengths to meet desired mounting height. 3. Wire fixtures to wires in outlet box. Copper wire is for grounding. 4. Install max 40W G9 bulbs. 5. Add candle covers. Run glass over candle cover.