Installation Sheet

Installation Instructions
Model
WARNING!
Xenon lamps burn hot. Allow 15 minutes after turning off before touching!
39745BCPC
ss
1.Turn breaker off for circuit on outlet where fixture is to be installed.
2.Remove mounting bracket from fixture and install to electrical box
3.Wire fixture using green wire as ground.
4.Install fixture to mounting bracket and secure by tightening ball nuts.
6.Install beveled crystal onto end of chrome stems and secure with cap stem.
7.Install maximum 40 watt Xenon lamps included.
A- 16 (
8")
B- 21(
2. 4")
5.Before install spoke balls onto end of red stems and secure with cap stem,
make sure stems were tighten up.
1 l ayer
2 l ayer
3 l ayer
4 l ayer
5 l ayer
6 l ayer

Summary of content (3 pages)