Installation Sheet



Pendant
Driver
InnerWire (+)
Driver Red (+)
Outer Mesh (-)
Driver Black
(-)

1. Connect both MESH (-) wire from each ring together. Connect Mesh
to the Black wire.
2. Connect both INNER (+), wire together.
Connect INNER(+) wires to the Red wire
STEP 2a.
If wire was cut whi le adjusting the hei ght, please note the wire consist of an outer mesh (-) and inner wi re (+).
Stri p wire to expose inner wires(+), then separate mesh (-) from inner wi re (+).
2b.