Installation Sheet

PRODUCT NAME
:
Diverse LED ( CRI90)
ITEM NUMBER: 57640
2.)
1.)
3.)
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Page 1 of (2)
Please consult your electrician for hanging fixture and wiring.
MADE IN CHINA
(B)Mouting screws
(A)Wire Nuts
(C)The lamp body
Step 1.
Bring positive, neutral, and ground supply
conductors (120V, 60Hz) to the room side from
junction box(E).
Step 2.
Connect black fixture wire to positive, white fixture
wire to neutral,and bare copper wire to ground
using wire
nuts provided
.
4.)
Step 4.
Line the acrylic shade up with the bumps on the
pan .Twist the acrylic shade until it is secure.
Mounting:
These fixtures mount directly to most standard metallic &
non-metallic electrical boxes with 2-3/4" to 3-1/2" hole spacingthat are at
least 1-1/2" deep. This includes 3-1/2" & 4" octagon boxes, round
mud-rings for octagon and square boxes, and 3" & 4"non-metallic round
boxes. Products are suitable for mounting on ceilings or walls, and are
acceptable for use within closet storage spaces when installed per NEC
requirements.
(D)The acrylic shade
Step 3.
Mount the mounting bracket (C) to the junction
box(E), using mounting screws(B)
.
Bare/Green/
Green and Yellow
Ground
A
E
Black
Positive
White
Neutral
B
C
Bare/Green/
Green and Yellow
Ground
A
E
Black
Positive
White
Neutral
C
Bare/Green/
Green and Yellow
Ground
A
E
Black
Positive
White
Neutral
C
Bare/Green/
Green and Yellow
Ground
A
E
Black
Positive
White
Neutral
C
D
B
B
Ground
Positive
Neutral
E
R
The fixture is designed to dim with an Electronic
Low Voltage dimmer. Dimming levels
will vary by dimmer.
Below is a list of recommended dimmers:
• Lutron DVELV-330P
• Lutron MAELV-600M
• Lutron SAELV-153P
• Leviton IPL06-10Z
• Leviton 6674-POW
• Legrand Tru-Universal ADTP703TUW4
Due to inrush current wattage should not
exceed 150 watts of product for a 600 watt dimmer.
Bulbs (integrated): Dimmable at 120V Integrated