Installation Sheet

Below is a List of Recommended Dimmers:
Due to inrush current wattage should not exceed
150 Watts of product for a 600 Watt dimmer.
36 W
120-277 VAC LED 120V DIMMING ONLY
Lutron MACL-153M
Lutron DVL-153P
Lutron SCL-153P
Leviton IPL06-10Z
Leviton 6674-POW
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Step 1: Remove mounting bracket
and install to electrical box.
1. Always disconnect power at the main
electrical panel before installation.
Please consult your electrician for
hanging fixture and wiring
.This fixture is designed to dim with a standard Triac
.forward phase dimmer. Dimming levels will vary
.by dimmer.
DRIVER
POSITIVE(+)
NEGATIVE(-) Black Wire(-)
Red Wire(+)
Pendant
Negative(-)
Positive(+)
Driver
Black Wire(-)
Red Wire(+)
MADE IN CHINA
Step 2: Adjust wire to the desired
mounting height. (If cutting wire is
necessary see instructions on Fig.4).
And wire fixture to wire in
outlet box. Red wire is live, black wire is
neutral ,yellow wire is ground
Step 4: Screw the box to the mounting plate
PRODUCT NAME: Wafer pendant
ITEM NUMBER: 57836