Installation Guide

MX-LD-R Series
1
2
3
4
1 - CounterMaxMX-LD-RLEDDisc
2 - ConnectingCord
3 - 6-WayDistributionHub
4 - 12V2ADriver
Surface Mount Installation Recessed Installation Optional Accessories
Step
One
Step
Two
Step
Three
Using hands, separate outer aluminum
shell from LED lamp.
Using included hardware and a
screw driver, secure outer alumi-
num shell to cabinet surface
Feed connecting cord through
a pre-drilled hole in the cabinet
surface or through the cut-out
of the outer aluminum shell.
Secure LED lamp into outer
aluminum shell.
Step
One
Step
Two
Step
Three
Using hands, separate outer aluminum
shell from LED lamp.
Cut out from the bottom of the
cabinet a hole using a
2.5” hole saw.
Feed connecting cord through
the hole in cabinet and secure
LED lamp.
FormoreinformationontheCounterMaxMX-LD-Rseriesorhelpwithinstallation,pleasevisitmaximlighting.comorcall800.486.2946
53850AL* SingleMX-LD-RLEDDiscAluminumFinish
53850BRZ* SingleMX-LD-RLEDDiscBronzeFinish
53850WT* SingleMX-LD-RLEDDiscWhiteFinish
53812BK MotionSensor
53811BK TouchDimmerBlack
53811WT TouchDimmerWhite
53807BK 24”ConnectingCordBlack
53807WT 24”ConnectingCordWhite
53809BK 48”ConnectingCordBlack
53809WT 48”ConnectingCordWhite
*Canaddanadditional3MX-LD-RLEDDiscsforatotalof6
MX-LD-RLEDDisc