Assembly Instruction

5. Remove the canopy from the mounting bracket,Pass the downrod through the canopy and thread
the fan wires through the downrod.
5-1 5-2
6. Remove the pin from the motor assemsly and insert the down rod,push the pin through the down rod
and the motor assemsly,secure the down rod by tightening the locking screws.(ensure you do not trap
any wires).
6-1 6-2
Page 5 of (8)
4. Directly connected to the household power supply
mode installation:
Connect the fan motor green wires to the household
green or bare wire using a wire connecting nut.
Connect the fan motor white wire to the household white
wire using a wire connecting nut . Connect the fan motor
black and blue wires to the household black wire using a
wire connecting nut. (Figure F)
5.Wall control: Please refer to page 7 for wall control
installation