Datasheet

ManualsBrandsMaxim ManualsClockBattery for NV RAM PCM

1 of 4

GENERAL DESCRIPTION

The DS9034PCX PowerCap is designed to be a

lithium power source for nonvolatile timekeeping

RAMs in Dallas Semiconductor’s directly surface-

mountable PowerCap Module (PCM) package. After

a PowerCap module board has been soldered in

place and cleaned, the DS9034PCX PowerCap is

placed on top of the PCM board to form a complete

PowerCap module package. The PowerCap is keyed

to prevent incorrect attachment.

The DS9034PCX can be easily removed by inserting

a regular screwdriver into a detachment feature and

prying gently outward and upward to release the

PowerCap from the PowerCap module board.

ABSOLUTE MAXIMUM RATINGS

Storage Temperature Range: -40°C to +85°C

Stresses beyond those listed under “Absolute Maximum Ratings”

may cause permanent damage to the device. These are stress

ratings only, and functional operation of the device at these or any

other conditions beyond those indicated in the operational sections

of the specifications is not implied. Exposure to the absolute

maximum rating conditions for extended periods may affect

device.

BATTERY CHARACTERISTICS

Nominal Voltage: 3V

Nominal Capacity: 130mAhr

Chemistry: Li(CF)x

CRYSTAL CHARACTERISTICS

Nominal Frequency: 32.768kHz

Load Capacitance: 6pF

FEATURES

 Provides 10 Years of Battery Backup Power for

Nonvolatile Timekeeping RAMs in the PowerCap

Module Package (PCM)

 Snaps Directly Onto Surface-Mounted PowerCap

Module Boards

 Detachment Feature Allows Easy Removal

 Compatible with these 34-Pin PowerCap Module

Boards:

DS1386P

DS1553P/YP/WP

DS1486P

DS1554P/YP/WP

DS1643P

DS1556P/YP/WP

DS1644P

DS1557P/YP/WP

DS1646P

DS1744P/YP/WP

DS1647P

DS1746P/YP/WP

DS1743P/WP

DS1747P/YP/WP

DS1251YP/WP

DS1248YP/WP

DS1244YP/WP

PACKAGE INFORMATION

PIN DESCRIPTION

NAME FUNCTION

X1, X2

32.768kHz Crystal Connections

BAT

+3V Battery Output

GND

Ground

DS9034PCX

owerCap with Crystal

www.maxim-ic.com

19-5584; Rev 10/10

Summary of content (4 pages)

PAGE 1
9-5584; Rev 10/10 DS9034PCX PowerCap with Crystal www.maxim-ic.com GENERAL DESCRIPTION FEATURES The DS9034PCX PowerCap is designed to be a lithium power source for nonvolatile timekeeping RAMs in Dallas Semiconductor’s directly surfacemountable PowerCap Module (PCM) package. After a PowerCap module board has been soldered in place and cleaned, the DS9034PCX PowerCap is placed on top of the PCM board to form a complete PowerCap module package. The PowerCap is keyed to prevent incorrect attachment.
PAGE 2
DS9034PCX PowerCap with Crystal ORDERING INFORMATION PART DS9034PCX+ DS9034I-PCX+ TEMP RANGE 0°C to +70°C -40°C to +85°C VOLTAGE (V) 3.0 3.0 PIN-PACKAGE PCM PCM +Denotes a lead(Pb)-free/RoHS-compliant package. *A “+” on the top of the package indicates a lead(Pb)-free device. PowerCap ATTACHMENT AND REMOVAL 3. Push down and forward with the screwdriver while inserting the PowerCap. This action will “open” the attachment feature.
PAGE 3
DS9034PCX PowerCap with Crystal PACKAGE INFORMATION For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PKG DIM A B C D E MIN 0.845 0.955 0.213 0.065 0.065 INCHES MON 0.850 0.960 0.223 0.070 0.070 MAX 0.855 0.965 0.233 0.075 0.
PAGE 4
DS9034PCX PowerCap with Crystal REVISION HISTORY REVISION DATE 10/10 DESCRIPTION Updated the Features section to remove DS1543P/YP/WP from list of compatible PowerCap module boards, updated the Ordering Information table to remove leaded versions PAGES CHANGED 1, 2 4 of 4 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.