Installation Sheet

PRODUCT NAME: LARMES

ITEM NUMBER: E20118-18

C o n t e m p o r a r y

L i g h t i n g

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE

MADE IN CHINA

Page 1 of

(2)

Bulbs (Included): 24 x 10 Watt G4

Please consult your electrician for hanging fixture and wiring.

Caution: Xenon bulbs get very hot and

may burn you. Always make sure bulbs

are off for a minimum of 10 minutes

before handling. Fixture may be dimmed

using an electronic low voltage dimmer.

WARNING: Wires need to be connected to

transformer found in canopy and should not

be connected directly to power source or a

short may occur

PAGE 1
Contemporary Lighting PRODUCT NAME: LARMES ITEM NUMBER: E20118-18 Please consult your electrician for hanging fixture and wiring. WARNING: Wires need to be connected to transformer found in canopy and should not be connected directly to power source or a short may occur Caution: Xenon bulbs get very hot and may burn you. Always make sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation Locate all hardware & components before discarding packaging 1.) Step.1: OUTLET BOX 2.) Step.2: Wire fixture to wires in outlet box. Green wire is for Ground. 3.) Step.3: Tighten screws (D) on the sides of the canopy (C) to secure the fixture. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.