Installation Sheet

Installation Instructions
Model E22223-24PC
1. It is recommended the fixture be
installed by a qualified licensed
electrician.
2. Turn breaker off for circuit on outlet
where fixture is to be installed.
3. Install round mounting bracket to
outlet box.
4. Determine mounting height of
fixture and adjust wires accordingly.
5. Position linear mounting bracket
onto mounting plate and mark 4 hole
for anchors.
6. Drill 4 x 1/8” holes and insert hallow
wall anchors.
7. Install liner mounting to ceiling
using screws for anchors.
8. Install trim plate onto screws
protruding through mounting plate
and secure with nuts supplied.
9. Wire fixture to outlet. Connect
white to neutral and green to ground.
10. Install fixture onto linear mounting
bracket and tighten screws to secure.
Warning! This fixture is supplied with
permanently installed LED light engine.
The transformer for this light engine is not
dimmable. Do not use a dimmer on this
fixture or it will damage the transformer.
Using a dimmer voids the warranty of the
fixture.