Installation Sheet

PRODUCT NAME: PARASOL

ITEM NUMBER: E22763-89BZ

Please consult your electrician for hanging fixture and wiring

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE

MADE IN CHINA

Page 1 of

(2)

C o n t e m p o r a r y

L i g h t i n g

The fixture is designed to with a standard Triac

forward phase dimmer. Dimming levels will

vary by dimmer.

Below is a list of recommended dimmers:

Lutron MACL-153M

Lutron DVL-153P

Lutron SCL-153P

Leviton IPL06-10Z

Leviton 6674-POW

Due to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

WARNING: Wires need to be connected to

driver found in canopy and should not connect

directly to power source or a short might occur.

PAGE 1
Contemporary Lighting PRODUCT NAME: PARASOL ITEM NUMBER: E22763-89BZ Please consult your electrician for hanging fixture and wiring The fixture is designed to with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer. Below is a list of recommended dimmers: Lutron MACL-153M Lutron DVL-153P Lutron SCL-153P Leviton IPL06-10Z Leviton 6674-POW Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation C Screw Nut D Canopy Locate all hardware & components before discarding packaging A B C D Step 1: Remove mounting bracket from fixture and install to electrical box using screws. Mark where anchors (B) at ends of bracket (A) meet the ceiling. Remove mounting bracket (A) from ceiling. Drill holes using 3/16”± drill bit where marked.