Installation Sheet

PRODUCT NAME: LARMES

ITEM NUMBER: E23111-18

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE

MADE IN CHINA

Page 1 of (2)

C o n t e m p o r a r y

L i g h t i n g

Bulbs (Included): 1 x 20 Watt G4

Caution: Xenon bulbs get very hot and

may burn you. Always make sure bulbs

are off for a minimum of 10 minutes

before handling. Fixture may be dimmed

using an electronic low voltage dimmer.

Please consult your electrician for hanging fixture and wiring.

WARNING: Wires need to be connected to

transformer found in canopy and should not be

connected directly to power source or a short may

occur

PAGE 1
Contemporary Lighting PRODUCT NAME: LARMES ITEM NUMBER: E23111-18 Please consult your electrician for hanging fixture and wiring. WARNING: Wires need to be connected to transformer found in canopy and should not be connected directly to power source or a short may occur Caution: Xenon bulbs get very hot and may burn you. Always make sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (B) Canopy (C) Socket (D) G4 Bulb (E) Glass Locate all hardware & components before discarding packaging 1.) Step.1: Remove Mounting Bracket (A) from Canopy to install to electrical box 2.) Step.2: Wire fixture to wires in outlet box. Green wire is for Ground. Secure canopy (B) to mounting bracket using screws on the sides of the canopy. 3.) Step.