Installation Sheet

PRODUCT NAME: LARMES

ITEM NUMBER: E23119-18

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE

MADE IN CHINA

Page 1 of (2)

C o n t e m p o r a r y

L i g h t i n g

Bulbs (Included): 9 x 20 Watt G4

Caution: Xenon bulbs get very hot and

may burn you. Always make sure bulbs

are off for a minimum of 10 minutes

before handling. Fixture may be dimmed

using an electronic low voltage dimmer.

Please consult your electrician for hanging fixture and wiring.

WARNING: Wires need to be connected to

transformer found in canopy and should not

be connected directly to power source or a

short may occur

PAGE 1
Contemporary Lighting PRODUCT NAME: LARMES ITEM NUMBER: E23119-18 Please consult your electrician for hanging fixture and wiring. WARNING: Wires need to be connected to transformer found in canopy and should not be connected directly to power source or a short may occur Caution: Xenon bulbs get very hot and may burn you. Always make sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (B) Anchor Bolts (C) Canopy (D) Socket (E) G4 Bulb (F) Glass Locate all hardware & components before discarding packaging OUTLET BOX Step.1: Remove mounting bracket (A) and install to electrical box. Mark where anchors meet ceiling, remove mounting bracket from ceiling, and then drill holes using 3/16" drill bit where marked (B).