Installation Sheet

PRODUCT NAME: LARMES

ITEM NUMBER: E23121-18

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE

MADE IN CHINA

Page 1 of

(2)

C o n t e m p o r a r y

L i g h t i n g

Bulbs (Included): 1 x 1.5W G4 LED

Please consult your electrician for hanging fixture and wiring.

WARNING: Wires need to be connected to driver found

in canopy and should not be connected directly to power

source or a short may occur

PAGE 1
Contemporary Lighting PRODUCT NAME: LARMES ITEM NUMBER: E23121-18 Please consult your electrician for hanging fixture and wiring. WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur Bulbs (Included): 1 x 1.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (B) Canopy (C) Socket (D) G4 Bulb (E) Glass Locate all hardware & components before discarding packaging 1.) Step.1: Remove Mounting Bracket (A) from Canopy to install to electrical box 2.) Step.2: Wire fixture to wires in outlet box. Green wire is for Ground. Secure canopy (B) to mounting bracket using screws on the sides of the canopy. 3.) Step.