Installation Sheet

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
2.)
1.)
3.)
(G)
Shade
(B)
Anchor Bolts
(F)
G9 Bulb
(A)
Mounting Bracket
(C)
Canopy
Remove mounting bracket (A) and install to
electrical box. Mark where anchors meet ceiling,
remove mounting bracket from ceiling, and then drill
holes using 3/16" drill bit where marked (B). Install
mounting bracket and attach anchors to secure
bracket at ends.
Step.1:
Step.2:
Wire fixture to wires in outlet box. Green
wire is for Ground.
Step.3:
Step.4:
Adjust wire to desired hanging height, and
screw on crystal ball shade (D).
4.)