Installation Sheet

PRODUCT NAME: PARASOL

ITEM NUMBER: E24497-20PC

C o n t e m p o r a r y

L i g h t i n g

Please consult your electrician for hanging fixture and wiring.

PRODUCTS ARE NOT INENDED

FOR COMMERCIAL USE.

MADE IN CHINA

Page 1 of (2)

WARNING: Wires need to be connected to

driver found in canopy and should not connect

directly to power source or a short might occur.

The fixture is designed to dim with a standard

Triac forward phase dimmer. Dimming levels

will vary by dimmer.

Below is a list of recommended dimmers:

Lutron MACL-153M

Lutron DVL-153P

Lutron SCL-153P

Leviton IPL06-10Z

Leviton 6674-POW

Due to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

PAGE 1
Contemporary Lighting PRODUCT NAME: PARASOL ITEM NUMBER: E24497-20PC Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer. Below is a list of recommended dimmers: Lutron MACL-153M Lutron DVL-153P Lutron SCL-153P Leviton IPL06-10Z Leviton 6674-POW Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation A B c Locate all hardware & components before discarding packaging A 1.) B Step.1: Remove mounting bracket (A) from fixture and install to electrical box. 2.) Step.2: Wire fixture to wires in outlet box. Copper wire is for Ground. c 3.) Step.3: Adjust wire length to desired mounting height, and tighten strain relief screws to secure.