Installation Sheet

PRODUCT NAME:Turbo LED Pendant

ITEM NUMBER: E24568-75PC

Please consult your electrician for hanging fixture and wiring.

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

MADE IN CHINA

Page 1 of (2)

1 x LED Max. 20W

The fixture is designed to dim with a standard

Triac forward phase dimmer.Dimming levels

will vary by dimmer.

Below is a list of recommended dimmers:

Lutron MACL-153M

Lutron DVL-153P

Lutron SCL-153P

Leviton IPL06-10Z

Leviton 6674-POW

Due to the inrush current wattage should not exceed

150 watts of product for a 600 watt dimmer.

WARNING! Wires need to be connected to driver

found in the canopy and should not be connected

directly to the power source or a short may occur.

C o n t e m p o r a r y

L i g h t i n g

PAGE 1
Contemporary Lighting PRODUCT NAME:Turbo LED Pendant ITEM NUMBER: E24568-75PC Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Triac forward phase dimmer.Dimming levels will vary by dimmer. Below is a list of recommended dimmers: Lutron MACL-153M Lutron DVL-153P Lutron SCL-153P Leviton IPL06-10Z Leviton 6674-POW Due to the inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer.
PAGE 2
IMPORTANT: Turn OFF the power at the main fuse or circuit breaker box before starting installation (C) Wire Nut (F) Screw Locate all hardware & components before discarding packaging (A) (B) Step.1: Remove mounting bracket (A) from (C) fixture and install to electrical box. (F) (E) (D) Step.2: Adjust wire length to desired mounting height, and tighten strain relief screw (D) to secure. Wire fixture to wires in outlet box. Green wire is for Ground.