2 Contemporary Lighting™ PRODUCT NAME:Swank 5LT Pendant ITEM NUMBER: E24595 Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Traci forward phase dimmer. Dimming levels will vary by dimmer.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation Plastic Bracket (B) Mounting Screws(D) Canopy(E) Safety Decorative Expansion Screws(C) Button(F) Nut(G) Screw(A) Locate all hardware & components before discarding packaging aéy/:p | | ) Ste pl :Remove mounting bracket from fixture and install to electrical F box. The safety button mounted to the bracket. Step :Adjust wire length to desired mounting height, and tighten strain relief screws to secure.
Pendant Wires Driver Wires Pendant | Driver Inner Wire |Driver Red Outer Mesh Driver Black(-) Step 5.If wires are cut in the process of adjusting the height, please note the pendants consist of an outer mesh wire(Negative ) and inner (Positive) wire that must be separated before re-joining with the driver output wires. Pendants are wired in series to the driver, as shown below .
