Installation Sheet

Assembly Instruction For ES94500
REMARK: The shade (k), glass diffuser (P) ,bracket (J) and nipple (L) was
separated by another box
R
4. Thread the nipple(L) to the bracket(J), and thread the hex nut (I) to the nipple (L) to adjust the
height
then put the metal washer (R), rubber washer (O), glass diffuser (P) and another
rubber washer (O) to the nipple (L), then secured by hex nut (I) and finial (Q)
1. Put the shade (K) to the cap (C), then secured by part (B)
2. Put the bracket (J) to the cap (C), then secured by nuts (A)
3. Lock the bulb into socket
5. Note: when you use the white pleated shade, you need to put the metal to
the top and bottom, then fix it by clip
C o n t e m p o r a r y
L i g h t i n g
TM